@article { author = {Ghorbani, Ahmad and Bemani, Mahdi and Ansari, Abdolhamid and Ghari, Hosseinali}, title = {Application of 2D electrical resistivity for geometry investigation of Noghol-Semirom landslide}, journal = {Scientific Quarterly Journal of Iranian Association of Engineering Geology}, volume = {6}, number = {شماره 3 و 4}, pages = {17-32}, year = {2014}, publisher = {Iranian Association of Engineering Geology}, issn = {2228-5245}, eissn = {}, doi = {}, abstract = {The Noghol landslide is located in Padena region in Semirom area in Isfahan province, Iran. The Noghol Landslide has a triangle form with a movement by E-W direction. The overall movement in landslide is from east to west toward to the Dengezloo river. The area influenced by the movement of landslide is about 600 by 700m. Landslide is occurred in the Bakhtiyari formation (massive to thick-bedded conglomerate with interbedded sandstone and marl belong to Cenozoic era). ERT surveying is carried out on the six profiles (parallel and perpendicular to the landslide direction) using a Dipole–dipole array. The total length of traverses is about 3 kilometres. Landslide is limited by a fault (strike NW-SE) from the north side and a permanent river from the west side of landslide. Conglomerate and marl are placed on the north and south sides of the fault, respectively. ERT survey yielded important information about the geometry and characteristics of the landslide. ERT results also show that two main sliding surfaces are present in Noghol landslide: a sliding surface in depths shallower than 20 m. On the outcrop of marl formation, normally, weathered surface creates a sliding surface. The second is a sliding surface in nearly 50 m depth. Here, right flank of landslide is formed by fault. Sliding surface is created when marl formation is partially saturated. So, both shallow and deep-seated landslide can be recognized in studied landslide. This information is confirmed by geological and borehole investigations.}, keywords = {ERT,Landslide,sliding surface,Marl,Bakhtiyari conglomerate,Semirom}, title_fa = {کاربرد مقاومت ویژه الکتریکی دو بعدی در شناسایی هندسه زمین‌لغزش نقل، سمیرم}, abstract_fa = {زمین‌لغزش نقل واقع شده در منطقه پادنای سمیرم در نزدیکی روستای نقل در 70 کیلومتری جنوب شهر حنا، رخ داده است. این زمین‌لغزش مثلث شکل است. قاعده آن با طول حدود 700 متر در سمت غرب و به سمت رودخانه دنگزلو (از سرشاخه‌های رودخانه ماربر)، و فاصله راس آن تا قاعده تقریباً 600 متر است. جهت حرکت کلی توده لغزشی نیز از شرق به غرب، و به طرف رودخانه می‌باشد. زمین‌لغزش در سازند بختیاری متشکل از کنگلومرا با میان لایه‌های مارنی رخ داده است. وضعیت زمین‌شناسی زیرسطحی محدوده زمین‌لغزش توسط برداشت‌های مقاومت ویژه الکتریکی دو بعدی با آرایه دوقطبی-دوقطبی مورد مطالعه قرار گرفت. به این منظور سه خط برداشت در جهت حرکت زمین‌لغزش و سه خط برداشت در جهت عمود بر جهت حرکت زمین‌لغزش با فواصل مساوی، در مجموع به طول 3 کیلومتر طراحی و بر روی آنها اندازه‌گیری‌های مقاومت ویژه الکتریکی صورت گرفت. نتایج مطالعه مقاومت ویژه الکتریکی دو بعدی، وجود لایه مارنی با ضخامت بیش از 50 متر در تمام محدوده زمین‌لغزش را نشان می‌دهد. ضلع شمال‌شرقی زمین‌لغزش توسط گسل محدود شده است، به طوری که شمال شرق آن کنگلومرا و جنوب غرب آن رخنمون مارن قرار دارد. وجود مارن در نزدیکی سطح زمین و در عمق باعث ایجاد دو مکانیزم لغزش یکی نزدیک سطح و دیگری در عمق بیشترشده است. سطح لغزش نزدیک سطح در عمق کمتر از 20 متر شناسایی شده است در حالی که سطح لغزش عمیق در عمق حدود 50 متر قابل تشخیص است. نتایج حاصل از مقاومت ویژه الکتریکی دوبعدی با نتایج چاهک‌های حفر شده مطابقت دارد.}, keywords_fa = {مقاومت ویژه الکتریکی دو بعدی,زمین‌لغزش,سطح لغزش,مارن,کنگلومرای بختیاری,سمیرم}, url = {https://www.jiraeg.ir/article_68330.html}, eprint = {https://www.jiraeg.ir/article_68330_612b55c29ba22dc535149e273b23c5cc.pdf} }