@article { author = {Shahparifar, Ghasem and Ajalloeian, Rasoul}, title = {Evaluation of particles shape and uniformity effects of grain soil on porosity}, journal = {Scientific Quarterly Journal of Iranian Association of Engineering Geology}, volume = {9}, number = {شماره 3 و 4}, pages = {45-55}, year = {2017}, publisher = {Iranian Association of Engineering Geology}, issn = {2228-5245}, eissn = {}, doi = {}, abstract = {One of important goals in projects of road and soil dams is to compact whatever more of soil. Compaction of soil with reducing in void ratio causes to improve technical properties such as resistance and permeability. Minimum void ratio depends on soil properties and compaction energy. The most important properties of a soil in this regard are soil particles shape and coefficient of uniformity. Now days, presentation of exact experimental equations in geotechnical engineering have special importance. Therefore in this study it is tried to propose an equation between void ratio and the effective parameters. There are a lot of papers in this field; but the results of those previous studies were not comprehensive. In this paper, an exactly equation for calculation of minimum void ratio was recommended for poorly graded soils. In this study, 42 soil samples with different shapes, coefficient of uniformity and size were prepared; then, using instruments and preparation chart, sphericity and roundness of samples were measured; next minimum void ratio of the samples were measured. At last, using 70 percent of data, an equation for calculating of minimum void ratio based on sphericity, roundness and coefficient of uniformity was presented. Also, using other results, validation of the equation was presented. The results were completely logical.}, keywords = {Soil particles shape,Sphericity,Roundness,Void ratio,Coefficient of uniformity}, title_fa = {ارزیابی تأثیر شکل و یکنواختی ذرات خاک‌های دانه‌ای بر درصد تخلخل}, abstract_fa = {یکی از اهداف مهم در ساخت جاده­ها و بدنه سدهای خاکی، متراکم ساختن هرچه بیشتر خاک می‌باشد. افزایش تراکم همراه با کاهش پوکی باعث بهبود خصوصیات مهندسی مصالح خاکی نظیر مقاومت و نفوذپذیری می­شود. نسبت پوکی حداقل خاک علاوه بر انرژی تراکم، به خصوصیات مهندسی خاک نیز وابسته می­باشد. از جمله عوامل تأثیرگذار بر خصوصیات خاک‌های دانه‌ای می‌توان به شکل ذرات و ضریب یکنواختی اشاره کرد. از آنجایی که روابط تجربی در مهندسی ژئوتکنیک از اهمیت ویژه­ای برخوردار هستند، بدین لحاظ در تحقیق حاضر سعی بر آن است که رابطه­ی تجربی بین پوکی و پارامترهای مزبور بدست آورده شود. اگرچه مطالعاتی در این زمینه صورت گرفته است ولیکن نتایج آن مطالعات جامع نبوده و از دقت بالایی برخوردار نیستند. در تحقیق حاضر با استفاده از نتایج آزمایشگاهی روابطی جامع و دقیق جهت برآورد پوکی حداقل خاک‌های دانه‌ای نسبتاً یکنواخت ارائه شده است. در این مطالعه چهل و دو نمونه خاک با شکل و ضریب یکنواختی متفاوت تهیه شدند، سپس با استفاده از وسایل اندازه‌گیری دقیق و نمودارهای مقایسه‌ای ضریب گردشدگی و کرویت هر کدام اندازه‌گیری شد و در نهایت با استفاده از 70 درصد از داده­های حاصل آمده، رابطه‌ای برای محاسبه پوکی حداقل بر اساس درجه گرد شدگی، کرویت و ضریب یکنواختی ارائه گردیده است. اعتبارسنجی روابط بدست­آمده نیز با استفاده از مابقی داده‌ها صورت گرفت. نتایج حاصله روندی منطقی و قابل قبول داشت.}, keywords_fa = {شکل ذرات خاک,کرویت,گردشدگی,پوکی,ضریب یکنواختی}, url = {https://www.jiraeg.ir/article_69586.html}, eprint = {https://www.jiraeg.ir/article_69586_0d7e9dada3272b5206a13b1b82299685.pdf} }