per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
1
24
87474
Original Article
ارتباط علوم زمینشناسی و مهندسی مکانیک در افزایش بهرهوری ماشینهای حفار تمام مقطع
Relationship of Geosciences and Mechanical Engineering in Increasing the Productivity of Tunnel Boring Machines
وحید جودکی
joudaki_vahid@yahoo.com
1
جعفر حسنپور
hassanpour@ut.ac.ir
2
رسول اجل لوئیان
rasajl@sci.ui.ac.ir
3
گروه سازه های زیرزمینی، شرکت مهندسین مشاور ساحل امید ایرانیان
دانشیار، دانشکده زمینشناسی، دانشگاه تهران
استاد، دانشکده زمینشناسی، دانشگاه اصفهان
در محیطهای دانشگاهی و صنعتی ایران، شناخت چندانی از ارتباط علم زمینشناسی با شاخههای فنی مکانیک و الکترونیک وجود ندارد. چنین مفاهیمی، در سرفصلهای دروس آموزش عالی ایران تبیین نشده است و تقریباً هیچگونه منبع پژوهشی به زبان فارسی در این زمینه منتشر نشده است. پیشینة حوزههای مطالعاتی مشترک مابین مهندسین مکانیک با متخصصین علوم زمین را میتوان در شروع مباحث ترامکانیک (Terramechanics) دانست. در این پژوهش با تشریح تجربیات حفاری مکانیزه در تونل بازیدراز، به ضرورت آغاز مطالعات بینرشتهای دانشآموختگان زمینشناسی با مهندسین مکانیک در آموزش عالی و صنایع کشور پرداخته میشود. در مقاله حاضر با تحلیل پارامترهای عملیاتی دستگاه حفار و بررسی شرایط زمینشناسی در پروژه تونل بازیدراز به چگونگی اعمال تغییرات در ساختار دستگاه تیبیام پرداخته میشود. نتایج نشان میدهد در این پروژه جهت سازگار نمودن ویژگیهای دستگاه با شرایط زمینشناسی مسیر، مجموعهای از اصلاحات مکانیکی از جمله: حذف جک شمارة 26 تراست، تعبیه 9 عدد چال گمانه پیشرو در نیمکره پایین سپر دستگاه، حذف تمام جکهای مفصلی پسیو دستگاه (به تعداد 16 جک)، تغییر آرایش ابزارهای برشی کلهحفار و ساخت 7 عدد مبدل گیربکس برای افزایش سرعت چرخش کلهحفار، اجتناب ناپذیر بوده است
In the academic and industrial environments of Iran, there is little understanding of the relationship between geological science and technical branches of mechanics and electronics. Such concepts are not explained in Iran's higher education curriculum, and almost no source of research has been published in Persian. The history of collaborative studies between mechanical engineers and geoscientists can be considered at the onset of the topics of the Terramechanics. In this research, by studying the excavation conditions in Bazideraz tunnel, the necessity of initiation of interdisciplinary studies of geology graduates with the mechanical engineers in higher education and industries of the country is discussed. In this paper, with the analysis of the operational parameters of the TBM and the study of geological conditions, discusses how to change the structure of the TBM. The results show that in this project, in order to adapt the structure of the machine to the geological conditions of the route, a series of structural reforms including the removal of 26 thrust jacks, the installation of 9 probe drilling holes in the shield, the removal of all passive articulation cylinders (16 jacks), a change in the arrangement of the disc cutters, and the construction of 7 gearbox converters to increase the rotary speed of the cutterhead, inevitable.
https://www.jiraeg.ir/article_87474_e12c9c69cb412307e2a32d3aba576fe2.pdf
ترامکانیک
مکانیک
مبدل گیربکس
جک مفصلی پسیو
Terramechanics
Mechanics
Gearbox Converters
Passive Articulation Cylinders
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
25
39
87516
Original Article
تاثیر تعداد سیکل های یخبندان-ذوب روی خواص فیزیکی و مکانیکی ماسه سنگ لوشان و ملات سیمان
Effect of number of freeze-thaw cycles on physical and mechanical properties of Lushan sandstone and cement mortar
کوروش عبدالغنی زاده
boofekoor499@yahoo.com
1
مهدی حسینی
ma.hosseini@eng.ikiu.ac.ir
2
مرتضی ثقفی یزدی
saghafiyazdi@gmail.com
3
دانشگاه بین المللی امام خمینی (ره)
دانشگاه بین المللی امام خمین (ره)
دانشگاه بین المللی امام خمینی (ره)
فرایند یخبندان-ذوب از جمله این عوامل است که به صورت گسترده خواص سنگها و بتن را تحت تاثیر قرار میدهد. بنابراین در مناطقی که احتمال رخ دادن این فرایند است ضروری میباشد تاثیر این فرایند بر روی ویژگیهای فیزیکی و مکانیکی مصالح در نظر گرفته شود. در بیشتر پژوهش های انجام شده دمای دوره ی یخبندان و دوره ی ذوب و مدت زمان آن بدون توجه به وضعیت آب و هوایی مناطقی که احتمال رخ دادن فرایند یخبندان-ذوب است انتخاب شده است و همچنین در مورد مصالح بر پایه سیمان تمرکز پژوهش ها بر روی بتن بوده و پژوهش های اندکی در رابطه با تاثیر یخبندان-ذوب روی ملات سیمان انجام شده است. در این پژوهش تاثیر تعداد سیکل های یخبندان-ذوب روی تخلخل، مقاومت تراکمی تک محوره و مقاومت کششی برزیلی نمونه ماسه سنگ و ملات سیمان با توجه به داده های هواشناسی مناطق غرب و شمالغرب ایران که احتمال رخ دادن فرایند یخبندان- ذوب در این مناطق می باشد بررسی شده است.همچنین برای بررسی تخریب در اثر یخبندان-ذوب عکس برداری سی تی اسکن از نمونه ماسه سنگ به عمل آمده است نتایج نشان داده است با افزایش تعداد سیکل های یخبندا-ذوب مقدار درصد تخلخل نمونه ها به صورت خطی افزایش در حالی که مقاومت تک محوره و مقاومت کششی آن ها کاهش پیدا کرده است همچنین بررسی عکس های سی تی اسکن نشان می دهد فاکتور آسیب در نمونه ماسه سنگ با افزایش سیکل افزایش پیدا کرده است.
Freeze-thaw process is one of these factors which extensively affects rocks and concrete properties. Thus, taking its impact on physical and mechanical properties of materials into account is required in the regions susceptible to the process. In most of the previous studies, the freezing and thawing periods' temperatures and their duration were chosen regardless of the weather conditions of the regions susceptible to the freeze-thaw process and regarding cement-based materials, the investigations were focused on concrete and there are a few studies on freeze-thaw effect on cement mortar. This study addressed the effect of number of freeze-thaw cycles on porosity, uniaxial compressive strength and Brazilian tensile strength of sandstone and cement mortar specimens considering the climatic data of western and northwestern regions of Iran in which the occurrence of freeze-thaw process is possible. Furthermore, the computerized scan (CT) was carried out on the sandstone specimen to examine the damage resulting from freeze-thaw. The results indicated that the increase in the number of freeze-thaw cycles caused in linear increase in the porosity of the specimens, while reducing their uniaxial and tensile strength. The study of the CT images also showed that the damage factor was increased by increasing the number of cycles.
https://www.jiraeg.ir/article_87516_ffc9b69a6ebbe20c5f3e571f4c36626c.pdf
خواص فیزیکی و مکانیکی
سیکل یخبندان- ذوب
ماسه سنگ
ملات سیمان
physical and mechanical properties
Freeze-thaw cycle
Sandstone
cement mortar
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
41
53
87517
Original Article
مدلسازی و بهینهسازی الگوی چالزنی و انفجار معدن سنگ لاشه بغدهکندی سقز
Modeling and optimizing the drilling and blasting pattern of the Boghde-Kandi quarry rubble mine of Saghez
محمد رضائی
m.rezaei@uok.ac.ir
1
استادیار گروه مهندسی معدن، دانشکده مهندسی، دانشگاه کردستان، سنندج، ایران
در این تحقیق از نرمافزار Delpat برای شبیهسازی و بهینهسازی الگوی چالزنی و انفجار در معدن سنگ لاشه بغدهکندی سقز استفاده شده است. بدین منظور، ابتدا اطلاعات لازم گردآوری و پارامترهای ژئومکانیکی مورد نیاز برآورد گردید. سپس بر اساس نرمافزار فوق، شبیهسازی الگوی انفجار برای قطر چالهای مختلف انجام شد. با مقایسه هزینههای الگوی چالزنی و انفجار بر اساس قطر چالهای مختلف، مشخص گردید که با افزایش قطر چال، هزینهها کاهش مییابد. با این حال، استفاده از قطر چال بالا باعث افزایش حجم مواد منفحره مصرفی و درنتیجه لرزش زمین و پرتاب سنگ و آسیب رساندن به تجهیزات و ساختمانهای اطراف خواهد شد. بر اساس نتایج مدلسازی، استفاده از چال با قطر 102 میلیمتر باعث کاهش هزینه کلی قابل توجه (0/08 دلار بر متر معکب) نسبت به چال با قطر 76 میلیمتر مورد استفاده در معدن شده و لذا به-عنوان قطر چال بهینه برای معدن مذکور در نظر گرفته شد. دیگر پارامترهای الگوی چالزنی و انفجار هم بر اساس این قطر چال برآورد و برای استفاده عملی در معدن پیشنهاد شد. اجرای عملی انفجار بر اساس الگوی پیشنهادی باعث بهبود خردایش سنگ و کاهش هزینهها و اثرات سوء ناشی از انفجار نسبت به الگوی قبلی گردید.
In most surface mines, the convention empirical methods are used to design the blasting pattern that leads to the undesirable results and increasing the production costs. In this research, the Delpat software package was utilized to simulate and optimize the blasting pattern of Boghde-Kandi quarry rubble mine. For this purpose, mine information was firstly collected and essential rock geomechanical parameters were measured. Then using the above-mentioned software, simulation of blasting pattern was conducted for hole diameters i.e., 76, 89, 102 and 115 mm. Comparison of the costs related to selection of each of the above hole diameters showed that overall costs were decreased by increasing in hole diameter. However, higher hole diameter required the greater volume of explosives which causes further ground vibration and flyrock. By utilizing the greater hole diameters, official buildings and; crushing and grading equipment sites will be located in the flyrock and ground vibration area and may be damaged. On the other hand, applying the hole diameter of 102 mm leads to the considerable cost decreasing (0.08 $/m3) compared to the 76 mm hole diameter that currently is used in mine. Therefore, hole diameter of 102 mm was proposed as an optimum one. According to this hole diameter, other parameters related to drilling and blasting pattern were calculated and proposed to perform in practice. Practical implementation of the blasting operation based on the suggested pattern leads to improve fragmentation and minimizing costs and side effects compared to the previous pattern.
https://www.jiraeg.ir/article_87517_5749b1d93f4b319b323f1643d1cf5f0c.pdf
"معدن سنگ لاشه بغدهکندی"
"الگوی چالزنی و انفجار"
"خردایش سنگ"
"نرمافزار Delpat"
"Quarry rubble mine"
"Drilling and blasting pattern"
"Rock fragmentation"
"Delpat software"
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
55
68
87546
Original Article
برآورد شکنندگی سنگهای گرانیتی مناطق تواندشت و گوشه (شهرستان بروجرد) از سختی واجهشی اشمیت و خصوصیات پتروگرافی
Predicting the brittleness of granitic rocks in Tavandasht and Gosheh (Borujerd ) by Schmidt hardness and petrographic characteristics
رضا خراسانی
khorasanii.123983@yahoo.com
1
رسول اجل لوئیان
rasajal@sci.ui.ac.ir
2
امین جمشیدی
jamshidi.am@lu.ac.ir
3
گروه زمین شناسی دانشگاه اصفهان
گروه زمین شناسی دانشگاه اصفهان
گروه زمین شناسی دانشگاه لرستان
شکنندگی یکی از مهمترین ویژگیهای مکانیکی سنگ است که در طرحهای ژئوتکنیکی مانند عملیات حفاری و سازههای زیرزمینی دارای کاربرد گستردهای است. تاکنون روش استانداردی برای برآورد شکنندگی سنگها معرفی نشده است و بنابراین از روشهای غیر مستقیم برای برآورد آن استفاده میشود. در این تحقیق با استفاده از روابط آماری دو و چند متغیره، شکنندگی سنگهای گرانیتی از سختی واجهشی اشمیت و خصوصیات پتروگرافی (میانگین اندازه کانیها و ترکیب کانی شناسی) برآورد شده است. برای رسیدن به این اهداف، 10 نمونه سنگ گرانیتی مختلف از معادن تواندشت و گوشه در اطراف شهر بروجرد تهیه شد. بر اساس آزمونهای آزمایشگاهی شاخص شکنندگی، سختی واجهشی چکش اشمیت، میانگین اندازه کانیها و نسبت کوارتز به فلدسپات نمونهها تعیین شدند. سپس جهت برآورد شکنندگی مدلهای مختلفی بر روی دادهها برازش داده شد. نتایج روابط آماری دو متغیره نشان میدهد که همبستگیهای متوسط (ضرایب تعیین بین 70/0 تا 87/0) بین شاخص شکنندگی با سختی واجهشی چکش اشمیت، میانگین اندازه کانیها و نسبت کوارتز به فلدسپات وجود دارد. در حالی که روابط آماری چند متغیره حکایت از تأثیر قابل توجه میانگین اندازه کانیها و نسبت کوارتز به فلدسپات روی دقت همبستگی بین شاخص شکنندگی و سختی واجهشی اشمیت (به ترتیب با ضرایب تعیین 91/0 و 93/0) دارد.
Brittleness is one of the most important mechanical properties of rock that is widely used in geotechnical designs such as drilling operations and underground structures. So far, standard method for estimating the brittleness of rocks have not been introduced and therefore, indirect methods are used to estimate them. In this research, brittleness of granitic rocks are estimated from Schmidt hardness and petrographic characteristics (minerals mean size and mineralogical composition) using simple and multivariate statistical relationships. To achieve these goals, 10 different granite rocks were collected from quarries Tavandasht and Gosheh around Borujerd (Lorestan province). Based on laboratory tests, brittleness index, Schmidt hammer hardness, minerals mean size and quartz to feldspar ratio were determined. Then, different models were fitted to the data for estimating the brittleness.The results of simple statistical relationships indicate that there are moderate correlations (determination coefficients ranging from 0.70 to 0.87) between the brittleness index with Schmidt hammer hardness, minerals mean size and quartz to feldspar ratio. While the multivariate statistical relationships indicate a significant effect of the minerals mean size and quartz to feldspar ratio on the accuracy of correlation between the brittleness index with Schmidt hammer hardness s (with determination coefficients of 0.91 and 0.93, respectively).
https://www.jiraeg.ir/article_87546_3e0016b0f1be40cc6b5c13c808599ca1.pdf
شکنندگی
سختی واجهشی اشمیت
میانگین اندازه کانیها
نسبت کوارتز به فلدسپات
گرانیت
brittleness
Schmidt hardness
Minerals mean size
Quartz to feldspar ratio
Granite
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
69
87
87579
Original Article
مطالعه آزمایشگاهی و عددی تاثیر برنده Uشکل بر درزه های ناممتد
Experimental and numerical investigation on the effect of u shape cutter force on the non-persistent joint
وهاب سرفرازی
sarfarazi@hut.ac.ir
1
شادمان محمدی بلبان آباد
vahab.sarfarazi@gmail.com
2
گروه مهندسی معدن، دانشگاه صنعتی همدان
گروه مهندسی معدن، دانشگاه صنعتی همدان.
هدف این مقاله بررسی تاثیر فاصله داری درزه ناممتد از برنده u شکل بر مکانیزم رشد ترک می باشد. همچنین مطالعه اینکه با تغییر زاویه داری درزه ناممتد نسبت به افق و تعداد درزه ناممتد، مکانیزم رشد ترک چگونه تغییر می کند. به این منظور 9 نمونه های با ابعاد cm 10* cm 10* cm 5 حاوی درزه ناممتد ساخته شد. سه نمونه اول دارای یک درزه ناممتد با زاویه داری های 0 ،45 و90 درجه، طول 2 سانتی متر و فاصله درزه تا برنده u شکل 2 سانتی متر می باشد. سه نمونه دوم دارای یک درزه ناممتد با زاویه داری های 0 ،45 و90 درجه، طول 2 سانتی متر و فاصله درزه تا برنده u شکل 4 سانتی متر میباشد. سه نمونه سوم دارای دو درزه ناممتد با زاویه داری های 0 ،45 و90 درجه که طول درزه های ناممتد 2 سانتی متر و فاصله درزه ناممتد اول تا برنده u شکل 2 سانتی متر و فاصله درزه ناممتد دوم از درزه ناممتد اول 2 سانتی متر میباشد. نمونه ها با نرخ mm/s 01/0 تحت آزمایش قرار گرفتند. همزمان با انجام مطالعات آزمایشگاهی، شبیه سازی عددی توسط نرم افزار FRANC2D نیز بر روی نمونه های حاوی درزه های ناممتد انجام شد. نتایج نشان می دهند که فاصله داری درزه ناممتد اتا برنده u شکل، زاویه داری درزه ناممتد و تعداد درزه ناممتد تاثیر بسزایی برمکانیزم رشد ترک دارد. همچنین نتایج نشان دادند که مود شکست و الگوی شکست نمونه های آزمایشگاهی و مدل های عددی مشابه می باشند.
The aim of this paper is to study the effect of spacing of the joint from ‘u’ shape cutter on the fracture mechanism and to investigate the effect of joint angularity under ‘u’ shape cutter loading on the shear failure mechanism. For this purpose nine sample with dimension of 5 cm *10 cm*10cm consisting non-persistent joints were prepared. The first sets of three specimens have one non-persistent joint with length of 2cm and angularity of 0, 45 and 90. The spacing between joint and top of the sample was 2cm. The second sets of three specimens have one non-persistent joint with length of 2cm and angularity of 0, 45 and 90. The spacing between joint and top of the sample was 4cm. The third sets of three specimens have two non-persistent joint with length of 2cm and angularity of 0, 45 and 90. The spacing between upper joint and top of the sample was 2cm and the spacing between lower joint and upper joint was 2cm. the samples were tested under loading rate of 0.01 mm/s. concurrent with experimental investigation, numerical simulation were performed on the non-persistent joint using FRANC2D. the results shows that the spacing between joint and specimen edge and joint angularity have important effect on the crack growth mechanism. Also, failure mode and failure pattern in experimental test and numerical simulation are similar.
https://www.jiraeg.ir/article_87579_e81bdb46ecea6efa6884e82ac57a45b5.pdf
برنده U شکل
زاویه درزه های ناممتد
تعداد درزه های ناممتد
فاصله داری درزه های ناممتد
U shape cutter
non-persistent joint angle
joint number
joint spacing
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
89
107
88477
Original Article
پیدایش و زوال دریاچه زمین لغزشی جایدر در جنوب استان لرستان
The formation and deterioration landslide lake of Jaydar in south Lorestan province
عبدالرضا نوریزدان
reza_nooryazdan@yahoo.com
1
محمد حسین قبادی
amirghobadi@yahoo.com
2
زمین شناسی،علوم،بوعلی سینا،همدان
استاد گروه زمین شناسی د انشگاه بوعلی سینا همدان
دریاچههای سدهای زمینلغزشی از پدیدهای زمینشناسی هستند که علیرغم زیباییهای خاص خود میتوانند بهعنوان یک خطر زمینشناسی مطالعه شوند. بهمن سنگی سیمره حداقل 3 سد و دریاچه زمینلغزشی در جنوب غرب ایران به وجود آورده است. سد زمینلغزشی جایدر یک سد نعل اسبی شکل تشکیلشده از بلوکهای بزرگ سنگی است. طول سد جایدر بیش از 11000 متر و ارتفاع متوسط آن 140 متر از سنگ کف است. این سد بر روی رودخانه دائمی کشکان در جنوب شهر پلدختر و حدفاصل روستاهای سراب جهانگیر و باغ جایدر، تشکیلشده است. با توجه به ابعاد هندسی و پایداری این سد تا حال حاضر، میتوان آن را قدیمیترین و بزرگترین سد زمینلغزشی ایران با مصالح سنگی نامید. دریاچه جایدر بهعنوان دومین دریاچه زمینلغزشی منطقه، دارای طول 36000 متر و مساحت 65 کیلومترمربع است. دریاچه جایدر از جنوب شهر پلدختر تا روستای جلگه خلج در مسیر جاده پلدختر – خرمآباد گسترش داشته است. بررسیهای انجامشده نشان میدهد، شکلگیری و مرگ این دریاچه در 3 مرحله است. 1- وقوع بهمن سنگی سیمره و تشکیل سد زمینلغزشی جایدر 2- بسته شدن مسیر رودخانه کشکان و تشکیل دریاچه و آبگیری تا تراز 740 متر از سطح دریا 3- تخلیه آب دریاچه بهوسیله یک کانال فرسایشی (سرریز) در سازند گچساران (سنگبستر رسوبات دریاچه جایدر). رادارگرام های تهیه شده از روش ژئوفیزیکی رادار نفوذی زمینی (GPR) با آنتن 10 مگاهرتزی نشان داد ضخامت رسوبات موجود در محل دریاچه جایدربه طور متوسط 70 متر است. بنابراین می توان گفت آب دریاچه جایدر از ارتفاع 640 تا 740 .....
Landslide-dammed lakes are a geological phenomenon that, despite of its beauty can be studied as a geologic hazard. Seymareh rock avalanche has created at least three dams and lake landslides in southwest Iran. Jaydar dam is a horseshoe-shaped landslide dam is composed from large rocky blocks. The length of the dam is more than 11,000 m and average height is 140 m from its bedrock. This dam is formed on the permanent Kashkan River in south ofPoldokhtar city and between the Sarab Jahangir and Baghe Jaydar villages. Due to the geometry dimensions and stability of the dam until now, it could be the oldest and largest rocky landslide dam in Iran. Jaydar Lake is the 2nd landslide lake in region, has a length of 36,000 m and an area of 65 Km2. The Jaydar Lake has expanded from the south of Poldokhtar city to Jolgeh Khalaj village on the Poldokhtar- Khorramabad road. The Present Research shows, that the formation and death of Jaydar Lake are in 4 stages. 1. Seymareh rock avalanche and formation the Jaydar landslide dam. 2. The closure of Kashkan River route 3. Formation of the landslide lake behind of dam and filling up to 740 meters above sea level (m.a.s.l). 4. Lake drainage through a valley (spillway) on bedrock in the northwest of the lake.4. Discharge of lake water by a solution channel (spillway) in the Gachsaran Formation (bedrock of The Jaydar Lake). ...
https://www.jiraeg.ir/article_88477_310f97b63d57f1121387a6731915f26c.pdf
دریاچه جایدر
سد زمین لغزشی
سرریز انحلالی
بهمن سنگی سیمره
Jaydar Lake
Landslide dam
Dissolution spillway
Seymareh rock avalanche
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2019-02-20
11
4
109
121
88497
Original Article
بررسی هیدروژئولوژیکی، هیدروژئوشیمیایی و ایزوتوپی آبخوان ساحلی جنوب شرق دریاچه ارومیه
Hydrogeological, hydrogeochemical and isotopic study of coastal aquifer in southeastern bank of Urmia Lake
امیر شمشکی
shemshaki@shahroodut.ac.ir
1
غلامحسین کرمی
g.karami@shahroodut.ac.ir
2
دانشکده علوم زمین، دانشگاه صنعتی شاهرود، شاهرود، ایران
دانشکده علوم زمین، دانشگاه شاهرود، شاهرود، ایران
در چند سال گذشته، کیفیت بخش چشمگیری از آبهای زیرزمینی مجاور ساحل جنوب شرقی دریاچه ارومیه، با افت زیادی همراه بوده است. همزمانی نسبی این پدیده با روند خشک شدن این دریاچه در سالهای اخیر، گستردگی سازندهای زمینشناسی انحلالپذیر در منطقه، افزایش چشمگیر دما و در نتیجه افزایش مقدار تبخیر، نفوذ آب شور از سمت ساحل خشک شده دریاچه و عواملی دیگر از جمله عوامل انسانی مانند تولید آلودگیهای صنعتی و آلودگیهای کشاورزی تشخیص نوع و میزان عوامل مؤثر بر کیفیت منابع آب زیرزمینی منطقه را با دشواری همراه کرده است. در این پژوهش با استفاده از ایزوتوپ-های پایدار دوتریوم و اکسیژن-18 به همراه برخی از عوامل کیفی و کمی آب زیرزمینی مانند تغییرات جهت و جریان آب زیرزمینی در سالهای گذشته، ضمن شناسایی عوامل مؤثر بر افت کیفی و شورشدگی آبهای زیرزمینی پهنه مطالعاتی، تا حد امکان عوامل مؤثر بر روند خشک شدن دریاچه ارومیه را نیز مورد ارزیابی قرار گرفت. این بررسی نشان میدهد که آبخوانهای منطقه به طور عمده از جریانهای سیلابی بویژه ذوب برف تغذیه میشوند. بنابراین، کاهش میزان جریانهای سطحی، اثر چشمگیری بر کاهش کمیت و کیفیت آبهای زیرزمینی منطقه میگذارد. از سوی دیگر، به دلیل وابستگی شدید سفره-های آب زیرزمینی منطقه به تغذیه توسط آبراههها، موجب میگردد که بخش عمدهای از آورد جریانهای سطحی به این محدوده صرف تغذیه آبخوانها شود. بنابراین، برداشت زیاد از منابع آب زیرزمینی منطقه میتواند نقش چشمگیری در کاهش جریانهای سطحی ورودی به دریاچه داشته باشد.
In recent years, along with the drying of Urmia Lake, groundwater quality in some areas of its coastal alluvial aquifers has been significantly deteriorated. Due to existence of evaporative geological formations, the remaining brine from the Urmia Lake and high evapotranspiration in the region, identifying the source of changes in groundwater quality is difficult in this area. In this research, it has been tried to evaluate the factors affecting the degradation of the quality and salinity of groundwater in the study area by stable isotopes of deuterium and oxygen-18 with some quality and quantity parameters of groundwater. The aquifers in the area are mainly caused by precipitation in the upstream of catchment areas and most likely flood from the melting snow. Therefore, reducing snowfall or changing the rainfall pattern from snow to rain effect on the quantitative and qualitative aquifers significantly in the study area. Exploitation of groundwater resources in the region could have a significant role in reducing the surface water into the lake.
https://www.jiraeg.ir/article_88497_0960e8d3f6e6e1d7abe3a41cb64e4ff6.pdf
آبخوان ساحلی
دریاچه ارومیه
شورشدگی
ایزوتوپهای پایدار
جریان آب زیرزمینی
Coastal Aquifer
Urmia Lake
Salinity
Stable isotopes
Groundwater flow