per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
1
14
68347
Original Article
مطالعه عوامل زمینشناسی موثر بر وقوع زمین لغزشهای منطقه زمان آباد، جنوب شرق همدان
The study of influence of geological factors on landslide occurrence
in Zaman-Abad region, south of Hamedan
محمد حسین قبادی
amirghobadi@yahoo.com
1
پریا بهزادتبار
2
سعید خدابخش
3
لیلی ایزدیکیان
4
استاد گروه زمین شناسی د انشگاه بوعلی سینا همدان
دانشجوی کارشناسی ارشد زمین شناسی مهندسی دانشگاه بوعلی سینا، همدان
دانشیار گروه زمین شناسی دانشگاه بوعلی سینا، همدان
استادیار گروه زمین شناسی دانشگاه بوعلی سینا، همدان
شناخت عوامل زمینشناسی موثر بر وقوع زمینلغزشها به منظور شناخت سازوکار آنها و ارائه روشهای تثبیت دارای اهمیت ویژهای است. در این پژوهش با بازدیدهای صحرایی، زمینلغزشهای منطقه زمانآباد در جنوب شرق همدان، در 10 ایستگاه، شناسایی شده و طی انجام آزمونهای آزمایشگاهی ترکیب کانیشناسی، خصوصیات فیزیکی و مکانیکی مواد تشکیل دهنده لغزشها تعیین گردیده است. سپس با استفاده از نرم افزار(slide ver5.014.2004) پایداری آنها در شرایط استاتیکی و دینامیکی مورد تجزیه و تحلیل قرارگرفته است. خاکهای تشکیل دهنده لغزشها ، نهشتههای انتقالیافته یک کانال دیرینه میباشند که در آنها هفت لایه تشخیص داده شده است. از هفت لایه مذکور براساس رده بندی متحد خاک چهار لایهSM-SP,SW SC,SP-SM,و سهلایهCL نامگذاری گردیدهاند. کانیهای رسی موجود در لایههای رسی (CL) ایلیت، کائولینیت و مونتموریلونیت میباشند. مهمترین عوامل لغزشهای موجود ترکیب کانیشناسی رسها، پنجه شویی شیب، گسلهای فعال، ناهمگنی مواد شیب و وجود خزش میباشد. با توجه به تجزیه و تحلیل انجام شده شیبهای مستعد گسیختگی ناهمگن هستند. ایستگاه های اول و چهارم که ناهمگنی بیشتری دارند کمترین ضریب اطمینان را در حالت استاتیکی نشان میدهند. به جز ایستگاههای 5، 9 و 10 سایر ایستگاهها در حالت دینامیکی ضریب اطمینان کمتر از یک دارند.
Understanding geological factors affecting landslides in order to understand their mechanisms and methods of stabilization is of utmost importance. In this research using field checking 10 stations were identified and during laboratory tests the mineralogical composition, physical and mechanical properties of slide components were determined. Then, using slide ver5.014 (2004) software static and dynamic stability were analyzed. Slide forming soils are sediments transported along channels that have been diagnosed in seven layers. The seven layers of the soil based on Unified soil classification are four layers namely; SM-SP, SW, SC, SP-SM, and three layers of CL. Clay minerals in the clay layer (CL) are Illite, Kaolinite and Montmorillonite. The most important factors in the occurrence of slides are clay mineralogical composition, toe crusher gradient, active faults, material heterogeneity of slope, and creep. According to the analysis conducted, heterogeneous slopes are prone to rupture. Stations I and IV are the most heterogeneous which represent the minimum safety factors in static mode. Except for stations 5, 9, and 10 other stations have a safety factor of less than one in a dynamic mode.
https://www.jiraeg.ir/article_68347_7f8ef51d7782cf08b91c24753acf07bb.pdf
زمین شناسی
زمین لغزش
نرم افزار (ver 5.014) slide
روستای زمان آباد
همدان
Geological factors
Landslide
Software slide (ver 5.014)
Zaman-Abad village
Hamadan
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
15
26
68348
Original Article
تعیین اندازه بلوکها در سنگهای اولترابازیک ارتفاعات جنوب شهر مشهد
Determination of block size in south heights of Mashhad city
زهره نوربخش رزمی
zohre_noorbakhsh@yahoo.com
1
غلامرضا لشکری پور
lashkaripour@um.ac.ir
2
محمد غفوری
ghafoori@um.ac.ir
3
دانشجوی کارشناسی ارشد زمینشناسی مهندسی، دانشگاه فردوسی مشهد
استاد گروه زمین شناسی مهندسی دانشگاه فردوسی
2. استاد گروه زمینشناسی دانشگاه فردوسی مشهد
اولترابازیکهای جنوب شهر مشهد بخش مهمیاز افیولیتهای مشهد را تشکیل میدهند. به دلیل افزایش قیمت زمین و توسعه شهر مشهد در ارتفاعات جنوبی آن و افزایش ساخت و سازها در این منطقه، مطالعه توده سنگ های اولترابازیک این منطقه و سیستم درزههای آن از لحاظ خصوصیات مهندسی تودهسنگ و تأثیر آنها در ناپایداری شیبها و ترانشههای ایجاد شده در این محدوده از اهمیت بسزایی برخوردار شده است. در این مقاله برای محاسبه RQD این سنگها سه روش تجربی مختلف استفاده شده است که نتایج حاصل از آنها همخوانی مناسبی را با هم نشان میدهند. علاوه بر تعیین شاخص کیفیت تودهسنگ، پارامترهایی از قبیل تراکم وزنی درزه (Wjd) و حجم بلوک (Vb) نیز محاسبه شده که مشخصات بهتری از اندازه بلوک را ارائه میدهند. اندازه بلوک به عنوان یک داده ورودی بسیار مهم در بسیاری از محاسبات مهندسی سنگ است و با استفاده از روشهای تجربی و مدلسازیهای مختلف قابل تعیین میباشد.
Ultrabasic rocks constitute a major part of ophiolites in south of Mashhad. Due to increase in the price of property and development of this city in southern highlands and also increasing construction in this area, the study of ultrabasic rocks and their joint system, from the perspective of engineering properties assessment of the rock mass and its effect on the instability of trenches and slopes in this area, has been a matter of great importance. In this study, three different experimental methods have been used to calculate RQD and the results indicate a reasonable concordance. In addition to the determination RQD, the parameters such as the weighted joint density (Wjd) and the block volume (Vb) have been calculated that these methods offers higher specifications of block size. The block size is an important input data in many rock engineering calculations and can be measured using different experimental methods and modeling.
https://www.jiraeg.ir/article_68348_e6120f5d46606b59c61eee49a20db455.pdf
اندازه بلوک
اولترابازیک
خط برداشت
حجم بلوک
تراکم وزنی درزه
Block size
ultrabasic
Scanline
Block volume
Weighted joint densit
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
27
42
68349
Original Article
تأثیر خواص بافتی بر ویژگیهای مهندسی کنگلومراهای منطقه فامنین، شمال خاوری استان همدان
The effects of petrographic characteristics on engineering properties of conglomerates from Famenin region, northeast of Hamadan province
غلامرضا خانلری
khanlari_reza@yahoo.com
1
مجتبی حیدری
heidari_enggeol@yahoo.com
2
مهران نوری
3
بهروز رفیعی
b_rafiei@basu.ac.ir
4
موسی اسفندیاری
5
1. عضو هیئت علمی گروه زمینشناسی دانشگاه بوعلی سینا، همدان
1. عضو هیئت علمی گروه زمینشناسی دانشگاه بوعلی سینا، همدان
2. دانشجوی کارشناسی ارشد زمینشناسی مهندسی گروه زمینشناسی دانشگاه بوعلی سینا، همدان
1. عضو هیئت علمی گروه زمینشناسی دانشگاه بوعلی سینا، همدان
کارشناس ارشد، رسوبشناسی و سنگشناسی رسوبی، دانشگاه بوعلی سینا، همدان
برای درک ارتباط میان ویژگیهای مهندسی با ویژگیهای سنگشناسی، تعداد هشت نمونه از کنگلومراهای سازند قم در منطقه فامنین واقع در شمالخاور استان همدان گردآوری شد. نمونهها برای تعیین مقاومت فشاری تکمحوری، شاخص مقاومت بار نقطهای، مدول الاستیسیته، تخلخل و چگالی خشک و اشباع تحت آزمونهای آزمایشگاهی قرار گرفتند. همچنین برشهای نازک میکروسکوپی نمونهها، برای تعیین ویژگیهای سنگشناسی، پارامترهای بافتی و کانیشناسی، مورد بررسی قرار گرفتند. در این پژوهش بر پایه نتایج تجزیه و تحلیلهای آماری، روابط پیشبینی کننده چندمتغیره برای برآورد ویژگیهای فیزیکی و مکانیکی با بهکارگیری ویژگیهای سنگشناسی و بافتی توسعه داده شدهاند. این مطالعه نشان میدهد که تاثیر پارامترهای بافتی بر روی ویژگیهای مهندسی، مهمتر از ترکیب کانیشناسی میباشد. همچنین مشخص گردید که آرایش همجوار Pp, Packing Proximity))، آرایش چگالی (Packing Density (Pd,، شکل دانهها، میانگین اندازه دانهها و مقدار سیمان و زمینه، ویژگیهای بافتی هستند که تاثیر چشمگیری بر روی ویژگیهای فیزیکی و مکانیکی نمونهها دارند. در مطالعه حاضر رگرسیون چندمتغیره خطی در چهار گام مختلف، شامل ترکیبات مختلفی از ویژگیهای سنگشناسی به عنوان پارامترهای ورودی برای هر ویژگی مهندسی، مورد استفاده قرارگرفته است. سرانجام بهترین رابطهها برای پیشبینی ویژگیهای مهندسی ارائه شده است.
To understand the relationship between engineering characteristics and petrological features, eight samples of the Qom Formation conglomerates from Famenin region in North-east of Hamedan of province were collected. Samples were examined in the laboratory for determining the uniaxial compressive strength, point load strength index, modulus of elasticity, porosity, dry and saturation density. For determining the petrological features, textural and mineralogical parameters, thin sections of samples were studied. In this study, based on the results of statistical analysis, predictive relationships were developed to estimate physical and mechanical properties using petrological features. This study showed that the effects of texture properties on the engineering properties is more important than mineralogical composition. It also became clear that the packing proximity, packing density, grain shape, mean grain size, percentages of cement and matrix are textural features that have a significant impact on the physical and mechanical properties of studied conglomerates. In the present study, multiple linear regression (MLR) was used in four different steps including different combinations of petrological features as input variables for each engineering characteristic. Finally, the best relationships were developed to predict the engineering properties of Conglomerates.
https://www.jiraeg.ir/article_68349_6e619407d9e7a881d1da57d424aa6e30.pdf
کنگلومرا
ویژگیهای سنگشناسی و مهندسی
رگرسیون چندمتغیره خطی
سازند قم
فامنین
همدان
Conglomerate
Petrological and engineering characteristics
Multiple linear regression
Qom Formation
Famenin
Hamadan
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
43
56
68350
Original Article
اثر خصوصیات تودهسنگ بر خردایش ناشی از آتشباری معادن سنگ آهن ایران مرکزی
Effect of rock mass properties on blast fragmentation in central Iran
iron ore mines
مجید اکبری
1
غلامرضا لشکری پور
lashkaripour@um.ac.ir
2
علیرضا یاراحمدی بافقی
ayarahmadi@yazduni.ac.ir
3
محمد غفوری
ghafoori@um.ac.ir
4
دانشجوی دکترای دانشگاه فردوسی مشهد
استاد گروه زمین شناسی مهندسی دانشگاه فردوسی
عضو هیأت علمی دانشگاه یزد
دانشگاه فردوسی مشهد
خصوصیات تودهسنگ یکی از فاکتورهای مهم و مؤثر بر نتایج حاصل از آتشباری میباشد. در این پژوهش با توجه به اهمیت خردایش بهینه در معدنکاری سعی بر این است تا اثر این خصوصیات بر توزیع اندازه سنگهای خرد شده در معادن مورد مطالعه شامل معادن سنگ آهن چغارت، چادرملو و سه چاهون مورد بررسی قرار گیرد. جهت رسیدن به این هدف خصوصیات تودهسنگ در طول حدود 1961 متر خط پیمایش و 1771 متر پروفیل لرزهای در غالب 51 بلوک انفجاری مورد ارزیابی قرار گرفت. از طرفی جهت اندازهگیری خردایش حاصل از آتشباری از روش پردازش تصاویر رقومی استفاده شد. بدین منظور با پردازش 1500 تصویر گرفته شده از سطح کپههای انفجاری، توزیع اندازه سنگهای خرد شده بدست آمد. بررسی تغییرات خردایش با توجه به تغییرات خصوصیات تودهسنگ نشان داد که با افزایش فاصلهداری ناپیوستگیها، تداوم ناپیوستگیها، بازشدگی ناپیوستگیها، افزایش سرعت موج طولی در سنگ بکر، افزایش زبری و مواجی بودن سطح ناپیوستگیها، افزایش مقاومت تراکمی تک محوری سنگ بکر و افزایش عمود بودن ناپیوستگیها بر سطح آزاد بلوک انفجاری اندازه مصالح حاصل از آتشباری نیز افزایش مییابد. نتایج این پژوهش بیانگر تأثیر خصوصیات تودهسنگ به اندازه مصالح حاصل از آتشباری میباشد.
Rock mass properties are one of the important factors affecting the results of the blasting. In this study, in regard to the importance of optimal fragmentation in mining tried to investigate the effect of these properties on the size distribution of fragmentation in the study area including Choghart, Chadormalu and Sechahun iron ore mines. To achieve this purpose, the properties of the rock mass along approximately 1961 meter scanlines and 1771 meter seismic profiles was evaluated in 51 blasting blocks. Also digital image processing technique was used in order to measure the blasting fragmentation. For this purpose with the processing of 1500 images taken from the surface of muck piles was obtained size distribution of fragmentation. Fragmentation changes according to the rock mass properties showed that with increasing of spacing, persistency, aperture, roughness and wavy surface of discontinuities, increasing of uniaxial compressive strength and longitudinal wave velocity in intact rocks and increasing of being close angle between discontinuities strike and free surface strike of blasting blocks to 90°, blasting material size are also increasing. The results indicate that the rock mass properties impact on the size of blasting materials.
https://www.jiraeg.ir/article_68350_5e200b8d1b44c1f290595f367d2a95fb.pdf
تودهسنگ
خردایش بهینه
آتشباری
ناپیوستگی
Rock mass
Optimal fragmentation
blasting
Discontinuity
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
57
70
68351
Original Article
پیش بینی دوام طولانی مدت ماسه سنگهای سازند قرمز بالایی در مقابل پدیده ذوب - انجماد و هوازدگی نمک با استفاده از مدل تابع تخریب
Predicting long term durability of upper red formation sandstones against freeze – thaw and salt weathering action using decay function model
محمد حسین قبادی
amirghobadi@yahoo.com
1
رضا بابازاده
2
موسی اسفندیاری
3
استاد گروه زمین شناسی د انشگاه بوعلی سینا همدان
دانشجوی دکتری زمینشناسی مهندسی، دانشگاه بوعلی سینا، همدان
کارشناس ارشد، رسوبشناسی و سنگشناسی رسوبی، دانشگاه بوعلی سینا، همدان
سنگهایی که در معرض فرایندهای هوازدگی از قبیل ذوب - انجماد و تبلور نمک قرار میگیرند یکپارچگی خود را از دست داده و در طی زمان معینی تخریب میشوند. با افزایش تعداد و شدت چرخههای هوازدگی میزان این تخریب نیز بیشتر خواهد شد، هر چند که سرعت تخریب برای انواع مختلف سنگها متفاوت است. در این مطالعه دوام پذیری ماسه سنگهای سازند قرمز بالایی (منطقه آوج، جنوب غرب استان قزوین) در مقابل عملکرد چرخههای ذوب - انجماد و تبلور نمک، با استفاده از مدل تابع تخریب مورد ارزیابی قرار گرفته است. برای این منظور تعداد 9 نمونه ماسه سنگ (مشخص شده با حروف A، B، C، CG، S، S1، Tr، Min و Sh) از بخش های مختلف سازند قرمز بالایی (در محدوده آوج – آبگرم) جمعآوری شده و پس از تعیین خصوصیات فیزیکی، مکانیکی و کانیشناسی، در معرض آزمایشهای ذوب - انجماد و تبلور نمک قرار داده شدند. مدل تابع تخریب این امکان را به ما میدهد که بتوانیم پارامترهای معنیداری از قبیل ثابت تخریب و نیمه عمر را برای انواع مختلف سنگها محاسبه کرده و درباره تخریب آنها اظهار نظر کنیم. نتایج به دست آمده از این مدل نشان میدهند که پارامترهای نیمه عمر و ثابت تخریب میتوانند در کارهای مهندسی و با صرف کمترین هزینه و زمان، جهت تعیین دوام سنگها به کار روند. همچنین این مدل نشان میدهد که سرعت تخریب انواع مختلف ماسه سنگها متفاوت میباشند.
Rocks subjected to cyclic weathering processes such as freeze – thaw and salt crystallization may lose their integrity and be deteriorated during time. By increasing in cycle numbers and their intensity, the rate of deterioration will be increased; however, this rate is not the same for different rocks. In this study long term durability of upper red formation sandstones against freeze – thaw and salt crystallization were evaluated using decay function model. By using this model it is possible to obtain some meaningful parameters and determine deterioration characteristics of rocks. For this purpose, 9 specimens of sandstones (specified by A, B, C, CG, S, S1, Tr, Min and Sh) were collected from different parts of the studied area, then their physical and mechanical characteristics including unit weight, effective porosity, water absorption, P-wave velocity, Brazilian tensile strength and point load strength were determined. In order to assess the effect of freeze – thaw and salt crystallization on physical and mechanical characteristics of sandstones, 60 cycles of freeze-thaw test and 20 cycles of salt crystallization test were performed. Then their effects on tensile strength and point load strength were recorded in different cycles. Also, decay constant and half – life of these parameters were calculated. In addition, slake durability index test was performed in three different cases such as standard (wet state), freeze – thaw (performing test on samples subjected to freeze – thaw action) and salt crystallization (performing test on samples subjected to salt crystallization action). Obtained slake durability index from different cases were used to estimate decay constant and half-life parameters. Bye using these parameters (tensile strength, point load strength and slake durability index test) and applying decay function model, long term durability of sandstones against freeze – thaw and salt crystallization were evaluated. Results show that decay constant and half – life can be used in engineering practice for determining long term durability without consuming more cost and time. Also this model indicates that the disintegration rate of sandstones is different and the half-lives obtained from three parameters are different for each sandstone.
https://www.jiraeg.ir/article_68351_389c6eca39a412f37b83e57e6add73e5.pdf
ماسه سنگ
سازند قرمز بالایی
مدل تابع تخریب
ثابت تخریب
نیمه عمر
Sandstone
Upper Red formation
Decay function model
Decay constant
Half-life
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
71
84
68352
Original Article
زلزلههای القائی در ساختگاه سدهای کرخه و کارون3
Induced Earthquakes at Karkheh and Karoun III Dam sites
ناصر حافظی مقدس
h_moghads@yahoo.com
1
پرویز امیدی
pomidy@shahroodut.ac.ir
2
غلام جوان دولوئی
3
زهرا حسینی
4
.استاد گروه زمینشناسی، دانشکده علوم، دانشگاه فردوسی مشهد
استادیار دانشکده علوم زمین، دانشگاه صنعتی شاهرود
دانشیار پژوهشگاه زلزلهشناسی و مهندسی زلزله
کارشناس ارشد زمینشناسی زیستمحیطی دانشگاه صنعتی شاهرود
در این مقاله الگوی لرزهخیزی در پهنه ساختگاه دو سد مهم کرخه و کارون 3 قبل و بعد از آبگیری مورد ارزیابی قرار گرفته است. دستاوردها نشان میدهد که بعد از آبگیری تغییر مشخصی در موقعیت کانون سطحی زمینلرزهها، عمق کانونی و سایر پارامترهای لرزهخیزی در پیرامون دریاچه سدهای مورد مطالعه صورت گرفته است. همچنین همبستگی خوبی بین تراز آب دریاچه سد و فراوانی زمینلرزهها در هر دو سد مشاهده گردید. تنها اختلاف موجود در الگوی زمینلرزههای القایی دو سد این است که پاسخ لرزهای و تأخیر زمانی زمینلرزهها نسبت به افزایش تراز آب در سد کارون کمیبیشتر از سد کرخه میباشد. این اختلاف به دلیل نفوذپذیری بیشتر سنگ کف در سد کارون 3 است.
In this paper, the seismicity models in Karkheh and Karoun III dam sites before and after impounding are investigated. The results show that location of earthquake epicenters, focal depths and the other seismic parameters around the reservoirs, after filling of reservoir of dams were changed. Also, a good matching has seen between water level and earthquake frequency in both dams. The only difference between the induced seismicity of two dams is the longer delay time of earthquakes response to rising of water level in Karoun III relative to Karkheh; because the permeability of bedrock around the Karoun III is higher than the Karkheh.
https://www.jiraeg.ir/article_68352_79848979d4b4e94af8abce4fa9fb9090.pdf
زمینلرزه القائی دریاچه سد
سد کرخه
سد کارون3
Reservoir induced earthquakes – Karkheh reservoir – Karoun III reservoir
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
85
94
68353
Original Article
بررسی تأثیر حفرههای زیرزمینی بر پاسخ سطح زمین به روش عددی و مقایسه آن با نتایج تجربی (مطالعه موردی تونلهای متروی کرج)
Numerical modelling of the effect of the underground cavities on evaluation of seismic site response (Study of subway tunnel in city of Karaj)
محمدجواد کاظمینی
1
ابراهیم حق شناس
haghshen@iiees.ac.ir
2
محسن کمالیان
3
دانشآموخته دکتری گروه عمران، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات تهران، تهران، ایران
2. پژوهشگاه بینالمللی مهندسی زلزله و زلزلهشناسی، تهران، ایران
2. پژوهشگاه بینالمللی مهندسی زلزله و زلزلهشناسی، تهران، ایران
مطالعات انجامشده در زمینۀ تأثیر حفرات زیرزمینی بر پاسخ لرزهای زمین بیشتر بر روشهای تحلیلی متمرکز بوده که ضعف اصلی آنها، ساده نمودن بیش از حد مسئله به لحاظ هندسه حفره و مشخصات مصالح است. لذا نیاز به مطالعات وسیعتر در این زمینه با استفاده از مدلسازی عددی و همچنین روشهای تجربی و بهویژه با در نظر گرفتن حفرات زیرزمینی واقعی ضروری است. در پژوهش حاضر این مهم بامطالعه بر روی تونل در دست احداث خط دوی پروژهی قطار شهری کرج مدنظر قرار گرفت. یازده محل در مجاورت این تونل و ایستگاههای مربوط به آن انتخاب گردید و برای آنها با استفاده از برداشتهای خردلرزهسنجی، نسبتهای طیفی خردلرزهها بین نقاطی در سطح زمین و نقاط مرجع در کف تونل محاسبه گردید. برای چهار محل مطالعه به روش عددی اجزا محدود نیز صورت گرفت. نتایج مطالعات تجربی در کاظمینی و همکاران (2015) ارائه گردیده است. هدف مقاله حاضر ارائه نتایج به دست آمده از روش عددی و مقایسه آن با نتایج تجربی است. نتایج نشان میدهند، حفرههای زیرزمینی بر پاسخهای به دست آمده در سطح زمین تأثیر قابل توجهی داشته، بهطوریکه حضور آنها باعث افزایش بزرگنمایی در بازههای فرکانسی کوچک و بزرگشده و با افزایش ابعاد حفره و نزدیکتر شدن به محور حفره مقادیر بزرگنمایی بیشتری قابل مشاهده است.
The study of the effect of underground cavities on site seismic response have been mainly carried out by analytical methods. The main weakness of these methods are extra simplification in terms of geometry and material properties. Therefore, the need to comprehensive studies in this field, using numerical modeling and experimental methods, particularly considering the real case underground cavities is essential. In the present study, a real case of a subway tunnel, belong the underconstruction subway network of the Karaj city (Iran) was considered. 4 sites along the line 2 of this subway, for which experimatal measurment of ambiant noise have been perfomed, were selected and for them numerical modeling by finite element method were carried out. Results of the numerical modeling are compared with the experimental spectral ratios obtained by Kazemeini et al (2014). The result show that the presence of underground cavities, affect the site seismic response significantly and leeds to apperance of amplification in low and high frequency ranges that increase with increment of tunnel dimention and decrement of the distance to the tunnel axis.
https://www.jiraeg.ir/article_68353_0008b6fb28183ca8b3347dc6df559eb9.pdf
حفرات زیرزمینی
پاسخ لرزهای
روش عددی
روش تجربی
خردلرزه
بزرگنمایی
Unerground cavities
Seismic response
Numerical modeling
Experimental technics
ambiant noise
per
انجمن زمین شناسی مهندسی ایران
نشریه انجمن زمین شناسی مهندسی ایران
2228-5245
2015-02-20
7
شماره 3 و 4
95
102
68354
Original Article
بررسی تغییرمکانهای پی سد بتنی جیرفت با استفاده از اکستنسومترهای سد
Assessments of Jiroft Concrete Arc Dam foundation Displacements by Use of Extensometers Data
عبداله سهرابی بیدار
sohrabi@khayam.ut.ac.ir
1
موسی امین نژاد
2
دانشیار گروه زمین شناسی مهندسی دانشگاه تهران
کارشناس ارشد سازههای هیدرولیکی، دفتر بهرهبرداری از تأسیسات تأمین آب، شرکت مدیریت منابع آب ایران
بهرهبرداری ایمن از سدها متکی بر سه عامل سلامت سازه، پایش رفتار سد و آمادگی برای شرایط اضطرار است. یکی از روشهای پایش رفتار سد و اجزاء وابسته آن استفاده از نتایج تجهیزات ابزار دقیق نصب شده در نقاط مختلف سازه است. سد جیرفت یک سد بتنی قوسی است که از دادههای اکستنسومترهای نصب شده آن به منظور تحلیل رفتار پی طی دوره 20 ساله بهرهبرداری سد استفاده شده است. این سد در 40 کیلومتری شمال شرقی شهر جیرفت و بر روی آهکهای الیگومیوسن ساخته شده است. اکستنسومترهای سد جیرفت از نوع 4 شاخهای بوده و دارای حداکثر عمق 40 متر میباشند که در دو وجه بالادست و پاییندست پی نصب شدهاند. جابجاییهای پی سد متأثر از بارگذاری مخزن بوده و منحنیهای بالاآمدگی پی بالادست و نشست پی پاییندست هماهنگی نسبی با تغییرات تراز مخزن دارد. به منظور حذف اثرات تغییرات کوتاه مدت سالیانه در تغییر شکلهای پی از تابع میانگین متحرک استفاده شده است. بیشترین مقادیر بالاآمدگی بالادست و نشست پاییندست در بلوک میانی سد و به ترتیب حدود 8 و 3 میلیمتر میباشد. برخی بلوکهای در پاییندست سد روند عمومی نشست را نشان میدهند که در حال حاضر دارای نرخ کمتر از 1/0 میلی متر در سال است. با توجه به دوام و ادامه نشست پاییندست در سالیان اخیر در بلوکهای مذکور لازم است پایش رفتار سد به طور مرتب به انجام رسیده و هر گونه تغییری در روند جابجاییها مورد توجه قرار گیرد.
Safe operation of dam has been based on three factors of structural integrity of dam, monitoring of dam and emergency preparedness. Instrumentation and data acquisition by instruments installed in different parts of the structure is one of the methods of monitoring. Jiroft Dam is an arch dam, that its extensometers data set has been used in order to understand the behavior of dam foundation during 20 years period of operation. The dam is 40km north-east of the city of Jirof, has been constructed on the Oligomiocene limestone. Jiroft Dam’s extensometers are from multi-rode type and have a maximum depth of 40m. The extensometers have been installed in the both side of upstream and downstream. Foundation displacements are affected from the reservoir loading and its water level. Foundation uplift in upstream and foundation subsidence in downstream are proportional to the reservoir water level variation. Moving average function used in order to eliminate short-term effects of annual changes in the water level. The highest values of uplift in upstream and subsidence in downstream occurred in the middle block and are about 8 and 3 mm, respectively. Downstream side of some blocks show a subsidence with constant small rate of about 0.1 mm/year. It is necessary to regularly dam monitoring considering continues constant rate of subsidence in mentioned blocks.
https://www.jiraeg.ir/article_68354_d97262a6a9c506ad947d62422e4a3d92.pdf
ایمنی سد
بهرهبرداری سد
اکستنسومتر
رفتار پی
نرخ جابجایی
سد جیرفت
Dam safety
Dam operation
Extensometer
Foundation behavior
Displacement rates
Jiroft Dam