ORIGINAL_ARTICLE
بررسی استحکام و کاربری سنگهای مصنوعی ساخته شده با رزین و مواد افزودنی مختلف
سنگ مصنوعی ترکیبی از سنگ دانه_های طبیعی و مواد افزودنی مانند صمغ های صنعتی (رزین)، سیمان و دیگر مواد پلیمری می باشد. در این پژوهش سنگ مصنوعی با مواد افزودنی و دو رزین (پلی_ستر و ویلین_استر) به منظور تعیین استحکام و نوع کاربری، با طرح اختلاط، 84 % سنگ دانه، 10 % رزین و 6 % مواد افزودنی به روش کاملا دستی بدون نیاز به سیستم خلاء و فشار ساخته شد. برای تعیین ویژگی های فیزیکی و مهندسی (کششی برزیلی، بارنقطه ای، مقاومت فشاری تک محوری و ارتعاش فراصوت)، سنگ_های مصنوعی ساخته شده با مواد افزودنی (الیاف شیشه، الیاف کربن، پلاستیک،) و سه سنگ دانه گرانیت(الموت، نهبندان و تکاب) مورد آزمایش واقع شده اند. بر اساس آزمایش های صورت گرفته سنگ_های مصنوعی ساخته شده با سنگ دانه الموت، رزین ویلین استر و الیاف شیشه؛ بیشترین مقاومت فشاری تک محوری و بارنقطه ای را دارند. اما نمونه_های ساخته شده با الیاف کربن نسبت به نمونه های ساخته شده با الیاف شیشه تقریبا 28% مقاومت کششی بیشتری دارند. نمونه های ساخته شده با پلاستیک دارای کمترین تخلخل بین نمونه سنگ های مصنوعی ساخته شده است. با توجه به نتایج فوق در محیط هایی که متاثر نیروهای فشارشی هستند از سنگ های مصنوعی با مقاومت فشارشی بالا(نمونه های ساخته شده با الیاف شیشه)، در محیط های متاثر نیروهای کششی؛ از سنگ_های مصنوعی با مقاومت کششی بالا( نمونه های ساخته شده با الیاف کربن) و در پیاده رو ها از سنگ های مصنوعی ساخته شده با پلاستیک به علت داشتن تخلخل پایین استفاده گردد.
https://www.jiraeg.ir/article_113124_a710be72e5d9f9c949346f497bbf03d8.pdf
2021-02-19
1
14
سنگ مصنوعی
الیاف شیشه و کربن
رزین ویلیناستر و پلیاستر
پلاستیک
ویژگیهای فیزیکی و مهندسی
اکبر
جعفرآذری خزینه
ajafarazari@gmail.com
1
زمین شناسی مهندسی، دانشکده علوم پایه، دانشگاه تربیت مدرس، تهران، ایران
AUTHOR
علی
ارومیه ای
uromeiea@modares.ac.ir
2
استاد گروه زمین شناسی دانشگاه تربیت مدرس
LEAD_AUTHOR
محمدرضا
نیکودل
nikudelm@modares.ac.ir
3
استاد گروه زمین شناسی دانشگاه تربیت مدرس
AUTHOR
محمدی، س.، نمکی، ل.، حامد پور دارابی، م.، 1395، ارائه یک برنامه رایانه ای به زبان متلب جهت مدلسازی پیشرو دادههای مغناطیس سنجی، کنفرانس ژئوفیزیک ایران، دوره 17.
1
خلیل آبادی، م.ر.، صفی خانی، م.، شاهمیرزایی، ح.، 1396، پردازشدادههایمغناطیسیدریاواستخراجنقشۀناهنجاری هایمغناطیسی، دوفصلنامهعلمی- پژوهشیهیدروفیزیک، دوره 3، شماره 1، صفحه 10-1.
2
ورفی نژاد، ر.، پرنو، س.، کامکار روحانی، ا.، 1398، وارونسازی دوبعدی دادههای مغناطیسسنجی با استفاده از قیدهای فشردگی و وزندهی عمقی: دو مطالعه موردی روی دادههای لوله انتقال گاز و دادههای آثار باستانی، مجله فیزیک زمین و فضا، دوره 45، شماره 3، صفحه 507-521.
3
کلاگری، غ.ح.، 1389، اصول اکتشافات ژئوفیزیکی، انتشارات مولف کتاب، 512 ص.
4
شاهوردی، م.، نمکی، ل.، منتهایی، م.، مصباحی، ف.، م.، بساوند، 1396، تفسیر دادههای مغناطیسی براساس محاسبه زاویه تیلت و بهبود گرادیان افقی، مطالعه موردی فروافتادگی زنجان، مجله فیزیک و فضا، دوره 43، شماره 1، 113-101.
5
علمدار، ک.، انصاری، ع.ح.، مجتهدزاده، س.ح، 1392، روشهای گرانی و مغناطیس در ژئوفیزیک کاربردی، چاپ اول، جلد 2، 522 ص.
6
نوروزی، غ.ح.، 1376، طراحی بهینه شبکه برداشت در مطالعات مغناطیسی، نشریه دانشکده فنی، جلد 30، شماره 2، 51-41.
7
نمکی، ل.، حفیظی، م.ک.، میرزایی، م.، 1389، معرفی روشی برای مدلسازی دوبعدی اتوماتیک دادههای مغناطیس سنجی با بررسی موردی منطقه مکران در جنوب شرق ایران، مجلة فیزیک زمین و فضا، دوره 36، شماره 1، 127-137.
8
کشوردوست، ر.، عابدی، م.، 1390، مدل سازی لوله های زیرسطحی با استفاده از داده های مغناطیس سنجی، هشتمین کنفرانس دانشجویی مهندسی معدن، دانشگاه تهران، تهران.
9
محمدی، س.، 1393، مدل سازی دوبعدی ساختارهای زمین شناسی به روش مغناطیس سنجی با استفاده از المان های منشوری قائم، پایان نامه کارشناسی ارشد، علوم پایه دانشگاه هرمزگان.
10
سرخیل، ح.، عظیمی، ی.، 1393، مدلسازی سه بعدی آنومالی های مغناطیسی محدوده کهک قم با استفاده از تحلیلی ریاضی روند سطحی ارتونرمال، همایش تخصصی کاربرد ریاضیات در علوم زمین، شیراز،دوره 1.
11
سیف، م.ر.، محمدزاده مقدم، م.، میرزایی، س.،1397، شناسایی و مکانیابی اهداف و تاسیسات زیرزمینی بر پایه دادههای مغناطیس سنجی با استفاده از روش های سیگنال تحلیلی، اویلر و وارون سازی سهبعدی، نشریه علوم و فناوری های پدافند غیرعامل، دوره 9، شماره 3، 368-359.
12
Saada, A., 2016. Edge detection and depth estimation of Galala El Bahariya Plateau, Eastern Desert-Egypt, from aeromagnetic data, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2(1), 25–41.
13
Fairhead, J.D., 2015. Advances in gravity and magnetic processing and interpretation, EAGE, 352 p.
14
Lanza, R., Meloni, A., 2006. The Earth’s Magnetism: An Introduction for Geologists, Springer-Verlag Berlin Heidelberg, 287 p.
15
Reynolds, J.M., 2011. An Introduction to Applied and Environmental Geophysics, 2nd Edition, A John Wiley & Sons, Ltd., Publication, 712 p.
16
Hinze, W.J., von Frese, R.R.B., Saad, A.H., 2013. Gravity and Magnetic Exploration: Principles, Practices, and Applications, Cambridge University Press, 525 p.
17
Valenta, J., 2015. Introduction to Geophysics–Lecture Notes, Czech Republic Development Cooperation, 72 p.
18
Parasnis, D.S., 1973. Mining geophysics, 356 p.
19
Telford, W.M., Geldart, L.P., Sheriff, R.E., 1990. Applied geophysics, 792 p.
20
Parasnis, D.S., 1996. Principles of applied geophysics, 5th edition, Springer, Dordrecht, Netherlands, 456 p.
21
Cooper, G.R., Cowan, D.R., 2004. Filtering using variable order vertical derivatives. Computers & Geosciences, 30(5), 455–459.
22
Ganiyu, S.A., Badmus, B.S., Awoyemi, M.O., Akinyemi, O.D., and Olurin, O.T., 2013. Upward continuation and reduction to pole process on aeromagnetic data of Ibadan area, South-Western Nigeria, Earth Science Research, 2, 66–73.
23
Claerbout, J.F., 1988. Fundamentals of geophysical data processing with applications to petroleum prospecting, Blackwell Scientific Publications.
24
Zeng, H., Xu, D., Tan, T., 2007. A model study for estimating optimum upward-continuation height for gravity separation with application to a Bouguer gravity anomaly over a mineral deposit, Jilin province, northeast China, Journal of Geophysics, 72, 145-150.
25
Agocs, W.B., 1955. Line spacing effect and determination of optimum spacing illustrated by Marmora, Ontario magnetic anomaly, Geophysics, 20(4), 871-855.
26
ORIGINAL_ARTICLE
بررسی همگرایی مدلهای ساختار سرعت موج برشی حاصل از تحلیل منحنی بیضیواری امواج سطحی ارتعاشات محیطی 1
تعیین وضعیت ساختار سرعت موج برشی از ملزومات شناسایی ساختگاه است. روشهای مرسوم به خصوص در ساختگاههای دارای آبرفت های ضخیم لایه دارای محدودیت هایی برای این منظور هستند. در این مطالعه از روش اندازه گیری تک ایستگاهی امواج خرد لرزه و برگردان نسبت بیضیواری امواج سطحی جهت شناسایی ساختار خاک استفاده شده است. ساختگاه مورد مطالعه در جنوب تهران قرار داشته و ضخامت قابل توجهی از آبرفتهای نرم دارد. نسبت بیضیواری با استفاده از نرمافزار Geopsy و روش تحلیل زمان فرکانس به دست آمده است. با توجه به همگنی و یکنواختی لایه های زیر سطحی ساختگاه از میانگین نسبت بیضیواری چهار ایستگاه داده برداری خرد لرزه برای برگردان و استخراج ساختار سرعت موج برشی استفاده شده است. همچنین به سبب عدم قطعیت در فرایند برگردان و به منظور بررسی همگرایی و پایداری جوابها 5 مدل اولیه مختلف در نظر گرفته شده و فرایند برگردان در هر مدل 3 بار تکرار گردیده است. نتایج حاصله دارای خطای بسیار کمی هستند و سنگ کف لرزهای را در عمق حدود 100 متری نشان میدهد. همچنین مدلهای مختلف دارای همگرایی مناسبی هستند که حاکی از اعتماد پذیری روش مورد استفاده برای استخراج ساختار سرعت موج برشی است.1
https://www.jiraeg.ir/article_115326_8e1b689b3d75989e9d730dffed83be1c.pdf
2021-02-19
15
27
ساختار سرعت
خرد لرزه
حل معکوس
بیضیواری
ارتعاشات محیطی
عبداله
سهرابی بیدار
asohrabi@ut.ac.ir
1
LEAD_AUTHOR
شهرام
مقامی
shahram.maghami@ut.ac.ir
2
دانشجوی دوره دکتری، دانشکده زمینشناسی، پردیس علوم، دانشگاه تهران
AUTHOR
احمد
زارعان
a.zarean@iaushab.ac.ir
3
استادیار گروه مهندسی عمران، دانشگاه آزاد اسلامی واحد شبستر
AUTHOR
ابراهیم
اصغری کلجاهی
e-asghari@tabrizu.ac.ir
4
عضو هیات علمی گروه علوم زمین/ دانشگاه تبریز
AUTHOR
جعفری محمدکاظم، رزم خواه آرش، کشاورزبخشایش محمد، 1382، پهنه بندی سرعت موج برشی آبرفت های گستره تهران، نشریه دانشکده فنی، جلد 37، شماره 2، صفحه 213-225.
1
داوودی محمد، حق شناس ابراهیم، میرجلیلی مصطفی، 1387، کاربرد روش آرایهای خردلرزهها در تعیین پروفیل سرعت موج برشی لایههای تحت الارضی در یک سایت نمونه در شهر تهران (پارک شقایق)، زلزله شناسی و مهندسی زلزله، دوره 10، شماره 4، ویژه نامه فارسی، صفحه 205-215.
2
سلطانی سعید، ابراهیم حق شناس، محسن فضلوی، 1396، پهنه بندی سرعت موج برشی در شهر اراک با استفاده از بیضیواری امواج رایلی استخراج شده از اندازه گیریهای خردلرزه های محیطی، علوم و مهندسی زلزله، سال چهارم، شماره دوم، صفحه 33-48.
3
شعبانی الهام، میرزایی نوربخش، حق شناس ابراهیم، اسکندری قادی مرتضی، 1390، روش بازنگری شده خودهمبستگی مکانی برای ارزیابی سرعت موج برشی، مجله فیزیک زمین و فضا، دوره 37، شماره 3، صفحه 71-85.
4
قلندرزاده عباس؛ علی کاوند، 1389، تعیین سرعت موج برشی در لایههای رسوبات آبرفتی با به کارگیری اندازهگیریهای میکروترمور، نشریه مهندسی عمران و نقشه برداری، مقاله 6، دوره 44، شماره 4، صفحه 525-536.
5
مهندسین مشاور پژوهش عمران راهوار، 1397، گزارش نهایی مطالعات ژئوتکنیک و مهندسی پی پروژه مرکز مدیریت بحران کشور، سازمان مجری ساختمانها و تاسیسات دولتی و عمومی.
6
یزدان فر روزبه، ناصر حافظی مقدس، حسین صادقی، محمدرضا قائمقامیان، 1394، بررسی داده های سرعت موج برشی و برآورد عمق لازم برای تحلیل دینامیکی اثر آبرفت در شهر مشهد، نشریه زمین شناسی مهندسی، جلد نهم، شمارۀ 4 ، صفحه 3207-3226.
7
Bard P.-Y. et al., 2005, Guidelines for the Implementation of the H/V Spectral Ratio Technique on Ambient Vibration Measurements and Interpretation., SESAME Project Report Deliverable D23-12, European Commission – Research General Directorate Project No. EVG1-CT-2000-00026 SESAME.
8
Bard P.-Y., 1997, Local effects on strong motion ground motion: basic physical phenomena and estimation methods for microzoning studies, In: SERINA: seismic risk and integrated seismological, geotechnical and structural approaches. ITSAK, European Commission, Directorate General for Science and Development.
9
Benkaci Nassima, El Hadi Oubaiche, Jean-Luc Chatelain, Rabah Bensalem, Djillali Benouar and Khadidja Abbes, 2018, Non-Stability and Non-Reproducibility of Ambient Vibration HVSR Peaks in Algiers (Algeria), JOURNAL OF EARTHQUAKE ENGINEERING, doi.org/10.1080/13632469.2018.1537903.
10
Daubechies, I., 1992, Ten lectures on wavelets. Society for Industrial and Applied Mathematics Philadelphia, PA, USA.
11
Endrun, B., 2011, Love wave contribution to the ambient vibration H/V amplitude peak observed with array measurements, J Seismol, 15 (3), pp 443–472.
12
Fazlavi M., E. Haghshenas, 2015, Importance of mode detection in ambient noise array application for shear wave velocity profile determination, International Journal of Civil Engineering, Transaction B: Geotechnical Engineering, Vol. 13, No. 1, pp 62-72.
13
Fäh, D., Kind, F. and Giardini, D., 2001, A theoretical investigation of average H/V ratios, Geophys. J. Int., 145, 535–549.
14
Fäh, D., Kind, F. and Giardini, D., 2003, Inversion of local S-wave velocity structures from average H/V ratios, and their use for the estimation of site-effects. Journal of Seismology, 7, 449–467.
15
Grossmann, A. and Morlet, J., 1984, "Decomposition of Hardly Functions into Square Integrable Wavelets". Society for Industrial and Applied Mathematics, Journal of Mathematical Analysis, 15.
16
Haghshenas, E., Bard, P.Y., Theodulidis, N. et al., 2008, Empirical evaluation of microtremor H/V spectral ratio, Bull Earthquake Eng , 6(1), pp 75–108.
17
Hobiger, M. et al., 2013. Ground structure imaging by inversions of Rayleigh wave ellipticity: sensitivity analysis and application to European strongmotion sites, Geophys. J. Int., 192(1), 207–229.
18
Hobiger, M., Bard, P.-Y., Cornou, C. & Le Bihan, N., 2009. Single station determination of Rayleighwave ellipticity by using the random decrement technique (RayDec), Geophys. Res. Lett., 36(14), 0–4.
19
Hobiger, M., Le Bihan, N., Cornou, C. & Bard, P.-Y., 2012. Multicomponent signal processing for Rayleigh wave ellipticity estimation: application to seismic hazard assessment, IEEE Signal Process. Mag., 29(3), 29–39.
20
Lardies. J. and Gouttebroze, S., 2002, Identification of modal parameters using the wavelet transform. Int. J. Mech. Sci. 44, 2263- 2283.
21
Lunedei E., Malischewsky P., 2015, A Review and Some New Issues on the Theory of the H/V Technique for Ambient Vibrations. In: Ansal A. (eds) Perspectives on European Earthquake Engineering and Seismology. Geotechnical, Geological and Earthquake Engineering, vol 39. Springer, Cham
22
Pastén C, M Sáez, S Ruiz, F Leyton, J Salomón, P Poli, 2016, Deep characterization of the Santiago Basin using HVSR and cross-correlation of ambient seismic noise, Engineering Geology 201, 57-66.
23
Poggi, V., and D. Fäh, 2010, Estimating Rayleigh wave particle motion from three-component array analysis of ambient vibrations, Geophys. J. Int., 180(1), 251-267.
24
Poggi, V., Fäh, D., Burjanek, J., Giardini, D., 2012, The use of Rayleigh-wave ellipticity for site-specific hazard assessment and microzonation: application to the city of Lucerne, Switzerland, Geophys. J. Int., 188, 1154-1172.
25
Sanchez-Sesma, F.J. et al., 2011. A theory for microtremor H/V spectral ratio: application for a layered medium, Geophys. J. Int., 186(1), 221–225.
26
Satoh, T., Kawase, H., Iwata, T., Higaski, S., Sato, T., Irikura, K. and Huang, H. C., 2001, S-wave velocity structure of Taichung basin, Taiwan estimated from array and singlestation records of microtremors. Bull. Seism. Soc. Am, 91, 1267-1282.
27
Scherbaum, F., Hinzen, K.-G. & Ohrnberger, M., 2003. Determination of shallow shear wave velocity profiles in the Cologne/Germany area using ambient vibrations, Geophys. J. Int., 152, 597–612.
28
Wathelet, M., 2008, An improved neighborhood algorithm: parameter conditions and dynamic scaling. Geophysical Research Letters, 35, L09301.
29
Wathelet, M., D. Jongmans, and M. Ohrnberger, 2004, Surface wave inversion using a direct search algorithm and its application to ambient vibration measurements, Near Surface Geophysics 2, 211-221.
30
Wathelet, M., Jongmans, D., Ohrnberger,M. & Bonnefoy-Claudet, S., 2008. Array performances for ambient vibrations on a shallow structure and consequences over V s inversion, J. Seismol., 12(1), 1–19
31
Yamanaka, H., Takemura, M., Ishida, H. and Niwa, M., 1994, Characteristics of long-period microtremors and their applicability in exploration of deep sedimentary layers, Bull. Seism. Soc. Am. 84, no. 6, 1831–1841.
32
Yamazaki, F. and Ansary, M. A., 1997, Horizontal-to-vertical spectrum ratio of earthquake ground motion for site characterization, Earthquake engineering and structural dynamics 26 (7), 671-689.
33
Yan, B. F., Miyamoto, A. and Brühwiler, E., 2006, Wavelet transform-based modal parameter identification considering uncertainty. Journal of Sound and Vibration, 291, 285-301.
34
ORIGINAL_ARTICLE
تاثیر کانیشناسی و اندازه دانهها بر آستانههای آسیب گرانیت و دیوریت
ویژگیهای تغییر شکل و شکست سنگها در نتیجه اعمال بار به مراحل مختلفی تقسیم شدهاند که بهوسیله آستانههای آسیب از هم تفکیک میگردند. با در نظر گرفتن پیدایش یا رشد ترک به عنوان یک ویژگی ماده، ویژگیهای زمینشناسی سنگها را میتوان به عنوان یک عامل کنترل کننده تغییرات در سطح تنش آستانههای آسیب در نظر گرفت. در این تحقیق آستانههای آسیب در دو سنگ گرانیت و دیوریت به کمک آزمایش تکمحوری و انتشار آوایی تعیین شد. پس از تعیین آستانههای آسیب نمونههایی از هر سنگ تا آستانههای آسیب مختلف بارگذاری شد و از آنها مقاطع نازک فلورسانس بهمنظور بررسی تأثیر کانیشناسی و اندازه دانهها و ترک خوردگی تهیه گردید. نتایج این تحقیق نشان داد که وجود کانی-های مقاوم به دلیل مقاومت در برابر ترک خوردگی سبب افزایش سطح تنش آستانه آغاز ترک میگردد. با کاهش میانگین اندازه دانهها قفل و بست بهتری در بین دانهها ایجاد میشود و از طرف دیگر تعداد مرز دانهها نیز افزایش پیدا میکند که سبب میگردد نیروی اعمال شده در سطح بیشتری توزیع گردد، درنتیجه کانیها کمتر تحت تأثیر قرار گرفته و میزان ترک در آنها کم شود که باعث افزایش سطح تنش آستانهای آغاز ترک در سنگهای ریزدانه میگردد.
https://www.jiraeg.ir/article_115328_646e302e5c8db805aea282bc07843a89.pdf
2021-02-19
29
41
آستانه آسیب
انتشار آوایی
ترک
دیوریت
گرانیت
شهرام
قاسمی
shahram.ghasemi@modares.ac.ir
1
گروه زمین شناسی مهدسی، دانشگاه تربیت مدرس
AUTHOR
ماشااله
خامه چیان
khamechm@modares.ac.ir
2
استاد گروه زمین شناسی مهندسی دانشگاه تربیت مدرس
LEAD_AUTHOR
محمدرضا
نیکودل
nikudelm@modares.ac.ir
3
گروه زمین شناسی مهندسی، دانشگاه تربیت مدرس
AUTHOR
احمد
ذلولی
a.zalooli@modares.ac.ir
4
دانش آموخته گروه زمین شناسی مهندسی، دانشگاه تربیت مدرس
AUTHOR
صادقیان، م.، 1373. بررسی پترولوژی سنگهای آذرین و دگرگون منطقه چشمه قصابان همدان. پایان نامه کارشناسی ارشد، دانشگاه تهران.
1
Alm, O., Jaktlund, L.-L., and Shaoquan, K., 1985, The influence of microcrack density on the elastic and fracture mechanical properties of Stripa granite: Physics of the Earth and Planetary Interiors, 40(3): 161-179.
2
Bieniawski, Z. T., 1967, Mechanism of brittle fracture of rock: part I—theory of the fracture process, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 4: 395-406.
3
Brace, W. F., 1961, Dependence of fracture strength of rocks on grain size, in Proceedings The 4th US Symposium on Rock Mechanics (USRMS), American Rock Mechanics Association.
4
Cai, M., Kaiser, P., Tasaka, Y., Maejima, T., Morioka, H., and Minami, M., 2004, Generalized crack initiation and crack damage stress thresholds of brittle rock masses near underground excavations: International Journal of Rock Mechanics and Mining Sciences, 41(5): 833-847.
5
Cao, R.-h., Cao, P., Lin, H., Pu, C.-z., and Ou, K., 2016, Mechanical behavior of brittle rock-like specimens with pre-existing fissures under uniaxial loading: experimental studies and particle mechanics approach: Rock Mechanics and Rock Engineering, 49(3): 763-783.
6
Dey, T., and Wang, C.-Y., 1981, Some mechanisms of microcrack growth and interaction in compressive rock failure, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 18: 199-209.
7
Diederichs, M., Kaiser, P., and Eberhardt, E., 2004, Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation: International Journal of Rock Mechanics and Mining Sciences, 41(5): 785-812.
8
Eberhardt, E., Stead, D., and Stimpson, B., 1999a, Quantifying progressive pre-peak brittle fracture damage in rock during uniaxial compression: International Journal of Rock Mechanics and Mining Sciences, 36(3) 361-380.
9
Eberhardt, E., Stead, D., Stimpson, B., and Read, R., 1998, Identifying crack initiation and propagation thresholds in brittle rock: Canadian Geotechnical Journal, 35(2): 222-233.
10
Eberhardt, E., Stead, D., & Stimpson, B. 1999a. Quantifying progressive pre-peak brittle fracture damage in rock during uniaxial compression. International Journal of Rock Mechanics and Mining Sciences, 36(3), 361-380.
11
Eberhardt, E., Stimpson, B., and Stead, D., 1999b, Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures: Rock mechanics and rock engineering, 32(2): 81-99.
12
Everitt, R. A., and Lajtai, E., 2004, The influence of rock fabric on excavation damage in the Lac du Bonnett granite: International Journal of Rock Mechanics and Mining Sciences, 41(8): 1277-1303.
13
Farahmand, K., and Diederichs, M., 2015, A calibrated Synthetic Rock Mass (SRM) model for simulating crack growth in granitic rock considering grain scale heterogeneity of polycrystalline rock, in Proceedings 49th US Rock Mechanics/Geomechanics Symposium, American Rock Mechanics Association.
14
Freire-Lista, D. M., Fort, R., and Varas-Muriel, M. J., 2015a, Freeze–thaw fracturing in building granites: Cold Regions Science and Technology, 113: 40-51.
15
Freire-Lista, D. M., Fort, R., and Varas-Muriel, M. J., 2016, Thermal stress-induced microcracking in building granite: Engineering geology, 206: 83-93.
16
Freire-Lista, D. M., Gomez-Villalba, L. S., and Fort, R., 2015b, Microcracking of granite feldspar during thermal artificial processes: Periodico di mineralogia, 84(3a) 519-537.
17
Ghasemi, S., Khamehchiyan, M., Taheri, A., Nikudel, M. R., and Zalooli, A., 2019, Crack Evolution in Damage Stress Thresholds in Different Minerals of Granite Rock: Rock Mechanics and Rock Engineering, 1-16.
18
Glamheden, R., Fredriksson, A., Roeshoff, K., Karlsson, J., Hakami, H., and Christiansson, R., 2007, Rock mechanics Forsmark. Site descriptive modelling Forsmark stage 2.2: Swedish Nuclear Fuel and Waste Management Co.
19
Hu, S., Lu, J., and Xiao, F., 2013, Evaluation of concrete fracture procedure based on acoustic emission parameters: Construction and Building Materials, 47: 1249-1256.
20
Kowallis, B. J., and Wang, H. F., 1983, Microcrack study of granitic cores from Illinois deep borehole UPH 3: Journal of Geophysical Research: Solid Earth, 88(b9) 7373-7380.
21
Kranz, R. L., 1979, Crack growth and development during creep of Barre granite, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 16: 23-35.
22
Lan, H., Martin, C. D., and Hu, B., 2010, Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading: Journal of Geophysical Research: Solid Earth, 115: B1.
23
Lee, S.-E., Kim, M.-I., Park, J.-H., Park, C.-K., Kang, M., and Jeong, G.-C., 2006, Damage process of intact granite under uniaxial compression: microscopic observations and contact stress analysis of grains: Geosciences Journal, 10(4): 457-463.
24
Lockner, D., 1993, The role of acoustic emission in the study of rock fracture, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 30: 883-899.
25
Martin, C., and Chandler, N., 1994, The progressive fracture of Lac du Bonnet granite, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31: 643-659.
26
Martin, C. D., 1993, The strength of massive Lac du Bonnet granite around underground openings, Thesis (Ph.D.), University of Manitoba.
27
Munoz, H., and Taheri, A., 2017, Local damage and progressive localisation in porous sandstone during cyclic loading: Rock Mechanics and Rock Engineering, 50(12): 3253-3259.
28
Petch, N. (1953). The cleavage strength of polycrystals. Journal of the Iron and Steel Institute, 174, 25-28.
29
Prodaivoda, G., Maslov, B., and Prodaivoda, T., 2004, Thermoelastic properties of rock-forming minerals: Геология и геофизика, 45(3): 389-404.
30
Rigopoulos, I., Tsikouras, B., Pomonis, P., and Hatzipanagiotou, K., 2011, Microcracks in ultrabasic rocks under uniaxial compressive stress: Engineering geology, 117(1-2) p. 104-113.
31
Seo, Y., Jeong, G., Kim, J., and Ichikawa, Y., 2002, Microscopic observation and contact stress analysis of granite under compression: Engineering Geology, 63(3-4) p. 259-275.
32
Sepahi, A. A., and Athari, S. F., 2006, Petrology of major granitic plutons of the northwestern part of the Sanandaj-Sirjan Metamorphic Belt, Zagros Orogen, Iran: with emphasis on A-type granitoids from the SE Saqqez area: Neues Jahrbuch für Mineralogie-Abhandlungen: Journal of Mineralogy and Geochemistry,183(1): 93-106.
33
Sousa, L. M., del Río, L. M. S., Calleja, L., de Argandona, V. G. R., and Rey, A. R., 2005, Influence of microfractures and porosity on the physico-mechanical properties and weathering of ornamental granites: Engineering Geology, 77(1-2): 153-168.
34
Taheri, A., Yfantidis, N., Olivares, C., Connelly, B., and Bastian, T., 2016, Experimental study on degradation of mechanical properties of sandstone under different cyclic loadings: Geotechnical Testing Journal, 39(4): 673-687.
35
Tuğrul, A., and Zarif, I., 1999, Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey: Engineering Geology, 51(4): 303-317.
36
Ündül, Ö., Amann, F., Aysal, N., and Plötze, M. L., 2015, Micro-textural effects on crack initiation and crack propagation of andesitic rocks: Engineering geology, 193: 267-275.
37
Ündül, Ö., and Tuğrul, A., 2012, The influence of weathering on the engineering properties of dunites: Rock Mechanics and Rock Engineering, 45(2): 225-239.
38
Wawersik, W., and Fairhurst, C., 1970, A study of brittle rock fracture in laboratory compression experiments, in Proceedings International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 7: 561-575.
39
Zalooli, A., Freire-Lista, D. M., Khamehchiyan, M., Nikudel, M. R., Fort, R., and Ghasemi, S., 2018, Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization, uses, and durability: Environmental earth sciences, 77(8): 315.
40
Zhao, X., Cai, M., Wang, J., and Ma, L., 2013, Damage stress and acoustic emission characteristics of the Beishan granite: International Journal of Rock Mechanics and Mining Sciences, 64: 258-269.
41
Zhou, S., Xia, C., and Zhou, Y., 2018, A theoretical approach to quantify the effect of random cracks on rock deformation in uniaxial compression: Journal of Geophysics and Engineering, 15(3): 627-637.
42
ORIGINAL_ARTICLE
محاسبة توزیع حجم بلوک های برجای توده سنگ دارای درزه های پایا با استفاده از ابر نقاط سه بعدی به دست آمده از روش های درزه نگاری دیجیتال
در پروژههای مهندسی سنگ، با اطلاع از وضعیت ساختاری و ابعاد بلوکهای تودهسنگ، به میزان زیادی در هزینهها صرفهجویی خواهد شد. ظهور فناوریهای جدید نقشهبرداری این امکان را فراهم کرده است تا به کمک مدلهای سهبعدی رخنمون دیجیتال تودهسنگ، عوارض ساختاری به آسانی شناسایی و برداشت شوند. این تحقیق، فرآیندی را ارائه میدهد که در آن با استفاده از دادههای ابر نقاط متراکم و با تلفیق قابلیتهای چند برنامة کامپیوتری، مقادیر جهتداری و فاصلهداری دستهدرزههای پایای موجود در تودهسنگ و همچنین نمودار توزیع حجم بلوکهای تودهسنگ برآورد میشود. تعلق نقاط مختصاتی به صفحات ناپیوستگیها با اجرای آزمون کوپلناریتی محاسبه شده و به کمک روشهای آماری دستهبندی میشوند. به دلیل پراکندگی فضایی نقاط متعلق به دستهناپیوستگیها، نقاط خوشهبندی شده و بر هر خوشه، صفحة واحدی برازش شد. به این ترتیب تمامی صفحات ناپیوستگی قابل روئیت موجود در تودهسنگ به صورت هندسی و با فرض پایایی، شبیهسازی شدند. از طرفی دیگر با کمک دادههای ابر نقاط متراکم، یک مدل حجمی از تودهسنگ ایجاد شد. با تلفیق هندسة مدل سهبعدی درزهها و مدل حجمی تودهسنگ، بلوکهای موجود شبیهسازی شده و نمودار توزیع حجم بلوک به دست آمد. به منظور اعتبارسنجی راه و روش ارائه شده در این تحقیق از یک مدل هندسی با سیستم درزهداری متعامد منظم که دارای حل تحلیلی دقیق است، استفاده شد.
https://www.jiraeg.ir/article_115329_81bae6605caa81939202135cb0e8dda0.pdf
2021-02-19
43
60
"درزه نگاری دیجیتال"
"برداشت نیمه خودکار ناپیوستگیها"
"خصیصهدهی تودهسنگا"
"نرمافزار استخراج دسته ناپیوستگیها"
سیداحمد
مهری شال
ahmad.mehri@yahoo.com
1
دانشگاه محقق اردبیلی، دانشکدة فنی و مهندسی
LEAD_AUTHOR
امینی، ا. خوشرو، س، ح. 1396. تخمین حجم بلوکهای برجای سنگ با استفاده از فاصلهداری درزهها در معادن تراورتن آذرشهر. نشریه علمی پژوهشی مهندسی معدن.
1
ملایی امامزاده، ا. بهاالدینی، م. سعیدی، غ. محمدی، م. 1398، تعیین حجم بلوک و شاخص مقاومت زمینشناسی GSI با استفاده از روش فتوگرامتری: مطالعه موردی معدن گل گهر سیرجان. نشریه علمی پژوهشی مهندسی معدن.
2
Bieniawski, Z.T., 1989. Engineering Rock Mass Classifications: A Complete Manual for Engineers and Geologists in Mining, Civil, and Petroleum Engineering. John Wiley & Sons.
3
Bonilla-Sierra, V., Donzé, F. V., Scholtès, L., & Elmouttie, M. K., 2012. The use of photogrammetry and 3D Discrete Element Models to better assess Rock Slope Stability.
4
Buyer, A., Schubert, W., 2017. Calculation the spacing of discontinuities from 3D point clouds. Procedia engineering, 191, 270-278.
5
Chesley, J. T., Leier, A. L., White, S., & Torres, R., 2017. Using unmanned aerial vehicles and structure-from-motion photogrammetry to characterize sedimentary outcrops: An example from the Morrison Formation, Utah, USA. Sedimentary Geology, 354, 1-8.
6
Dearman W.R., 1991. Engineering geological mapping. Butterworth - Heinemann Ltd., Oxford.
7
Dewez, T., Girardeau-Montaut, D., Allanic, C., & Rohmer, J., 2016. Facets: A cloudcompare plugin to extract geological planes from unstructured 3d point clouds.
8
Elmouttie, M. K., Poropat, G. V., 2012. A method to estimate in situ block size distribution. Rock mechanics and rock engineering, 45(3), 401-407.
9
Gaich, A., Poetsch, M., & Schubert, W., 2006. Acquisition and assessment of geometric rock mass features by true 3D images. In Golden Rocks, The 41st US Symposium on Rock Mechanics (USRMS). American Rock Mechanics Association.
10
Gigli, G., Casagli, N., 2011. Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds. International Journal of Rock Mechanics and Mining Sciences, 48(2), 187-198.
11
Jaboyedoff, M., Metzger, R., Oppikofer, T., Couture, R., Derron, M.H., Locat, J., Turmel, D., 2007. New insight techniques to analyze rock-slope relief using DEM and 3Dimaging cloud points: Coltop-3D software. In: Francis, T. (Ed.), Rock Mechanics: Meeting Society’s Challenges and Demands. Proceedings of the 1st Canada–U.S. Rock Mechanics Symposium, Vancouver, Canada, May 27–31, pp. 61–68.
12
Jaboyedoff, M., Oppikofer, T., Abellan, A., Derron, M.H., Loye, A., Metzger, R., Pedrazzini, A., 2012. Use of LiDAR in landslide investigations: a review. Nat. Hazards 61, 5–28.
13
Guo, J., Liu, Y., Wu, L., Liu, S., Yang, T., Zhu, W., & Zhang, Z. (2019). A geometry-and texture-based automatic discontinuity trace extraction method for rock mass point cloud. International Journal of Rock Mechanics and Mining Sciences, 124, 104132.
14
Kemeny, J., Post, R., 2003. Estimating three-dimensional rock discontinuity orientation from digital images of fracture traces. Computers & Geosciences, 29(1), 65-77.
15
Lato, M.J., Voge, M., 2012. Automated mapping of rock discontinuities in 3D LiDAR and photogrammetry models. Int. J. Rock Mech. Min. Sci. 54, 150–158.
16
Monsalve, J. J., 2019. Integrating Laser Scanning with Discrete Element Modeling for Improving Safety in Underground Stone Mines (Doctoral dissertation, Virginia Tech).
17
Mosch, S., Nikolayew, D., Ewiak, O., & Siegesmund, S., 2011. Optimized extraction of dimension stone blocks. Environmental Earth Sciences, 63(7-8), 1911-1924.
18
Palmstrom, A., Sharma, V. I., & Saxena, K., 2001. In-situ characterization of rocks. Chapter 2: Measurement and characterization of rock mass jointing. balkema publ, 1-40.
19
Powers, P. S., Chiarle, M., & Savage, W. Z., 1996. A digital photogrammetric method for measuring horizontal surficial movements on the Slumgullion earthflow, Hinsdale county, Colorado. Computers & Geosciences, 22(6), 651-663.
20
Priest, S., Hudson, J., 1976. Discontinuity spacings in rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. Elsevier, pp. 135–148.
21
Riquelme, A. J., Abellán, A., & Tomás, R., 2015. Discontinuity spacing analysis in rock masses using 3D point clouds. Engineering Geology, 195, 185-195.
22
Riquelme, A., Cano, M., Tomás, R., & Abellán, A., 2017. Identification of rock slope discontinuity sets from laser scanner and photogrammetric point clouds: A comparative analysis. Procedia engineering, 191, 838-845.
23
Riquelme, A., Tomás, R., Cano, M., Pastor, J. L., & Abellán, A., 2018. Automatic mapping of discontinuity persistence on rock masses using 3D point clouds. Rock Mechanics and Rock Engineering, 51(10), 3005-3028.
24
Riquelme, A.J., Abellán, A., Tomás, R., Jaboyedoff, M., 2014. A new approach for semiautomatic rock mass joints recognition from 3D point clouds. Comput. Geosci. 68, 38–52. http://dx.doi.org/10.1016/j.cageo.2014.03.014 (URL: http://www.sciencedirect. com/science/article/pii/S0098300414000740)
25
Sen, Z., Eissa, E. A., 1992. Rock quality charts for log-normally distributed block sizes. In International journal of rock mechanics and mining sciences & geomechanics abstracts (Vol. 29, No. 1, pp. 1-12). Pergamon.
26
Slob, S., van Knapen, B., Hack, R., Turner, K., Kemeny, J., 2005. Method for automated discontinuity analysis of rock slopes with three-dimensional laser scanning. Transp. Res. Rec. 1913, 187–194.
27
Sousa, L. M. O. (2010). Evaluation of joints in granitic outcrops for dimension stone exploitation. Quarterly Journal of Engineering Geology and Hydrogeology, 43(1), 85-94.
28
Sturzenegger, M., Stead, D., 2009a. Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts. Eng. Geol. 106, 163–182. http://dx.doi.org/10.1016/j.enggeo.2009.03.004 (URL: http://www. Sciencedirect.com/science/article/pii/S0013795209000556).
29
Sturzenegger, M., Stead, D., 2009b. Quantifying discontinuity orientation and persistence on high mountain rock slopes and large landslides using terrestrial remote sensing techniques. Nat. Hazards Earth Syst. Sci. 9, 267–287.
30
Sturzenegger, M., Stead, D., Elmo, D., 2011. Terrestrial remote sensing-based estimation of mean trace length, trace intensity and block size/shape. Eng. Geol. 119, 96–111.
31
Tannant, D. D. (2015). Review of photogrammetry-based techniques for characterization and hazard assessment of rock faces. International Journal of Georesources and Environment-IJGE (formerly Int'l J of Geohazards and Environment), 1(2), 76-87.
32
Thiele, S. T., Grose, L., Samsu, A., Micklethwaite, S., Vollgger, S. A., & Cruden, A. R., 2017. Rapid, semi-automatic fracture and contact mapping for point clouds, images and geophysical data. Solid Earth, 8(6), 1241.
33
Yarahmadi, R., Bagherpour, R., Kakaie, R., Mirzaie, N. H., & Yari, M., 2014. Development of 2D computer program to determine geometry of rock mass blocks. International Journal of Mining Science and Technology, 24(2), 191-194.
34
ORIGINAL_ARTICLE
تحلیل پایداری و تعیین سیستم نگهداری تراز 2741 معدن زیرزمینی سرب و روی انگوران
پایداری فضاهای بزرگ زیرزمینی در استخراج معادن و تحلیل تنشها و تغییرشکلهای ایجاد شده پس از حفاری از اهمیت خاصی در استخراج زیرزمینی مواد معدنی برخوردار میباشد. معدن سرب و روی انگوران در 125 کیلومتری جنوب غربی شهرستان زنجان قرار دارد و بر اساس برنامهریزی بعمل آمده، سالیانه حداقل 120000 تن استخراج کانسنگ از بخش زیرزمینی معدن انگوران انجام خواهد شد. هدف از این تحقیق، تحلیل پایداری کارگاهها و گالری تراز 2741 معدن زیرزمینی سرب و روی انگوران میباشد تا بتوان ابعاد مناسب کارگاه و پایهها را بدست آورده و تحکیمات لازم را نیز ارائه نمود که از نرم افزار Phase2 V8.03 جهت انجام تحلیلهای مکانیک سنگی استفاده شده است. برای این منظور در دو حالت کانسنگ سولفوره و اکسیده، ابعاد و تحکیمات مختلف کارگاهها براساس مقایسه جابجاییهای رخ داده در اطراف کارگاهها با میزان کرنشهای بحرانی و مجاز محاسبه شده از روابط ساکورایی تعیین شده است. نتایج تحلیلهای انجام شده بر مبنای دادههای ورودی نشان دهنده وضعیت مناسب پایداری در کانسنگ سولفوره میباشد. تاثیر لنگه باقیمانده در کانسنگ سولفوره برای دو عرض لنگه 5 و 10 متری بررسی شد و نتایج نشان داد که در کانسنگ سولفوره در هر دو حالت کارگاهها بدون سیستم نگهداری پایدار هستند. اما به دلیل ناپیوستگیها موجود در سقف و قسمتهایی که میکس سولفوره و اکسیده هستند، نیاز به سیستم نگهداری میباشد. در کانسنگ اکسیده و مخلوط، به دلیل ضعیف بودن خصوصیات سنگ بدون توجه به ابعاد لنگه حتما باید از سیستم نگهداری استفاده نمود.
https://www.jiraeg.ir/article_115331_9db5952f310376694a42c062bb42f2c8.pdf
2021-02-19
61
74
معدن زیرزمینی سرب و روی انگوران
روش عددی المان محدود
نرمافزار Phase 2d
معیار ساکورایی
سجاد
چهره قانی
s.chehreghani@urmia.ac.ir
1
گروه مهندسی معدن دانشگاه ارومیه
LEAD_AUTHOR
حسین
آزاد سولا
h.azad68@gmail.com
2
دانشجوی دکتری مکانیک سنگ، دانشکده مهندسی معدن، دانشگاه صنعتی سهند
AUTHOR
حمید
چاکری
h.chakeri@gmail.com
3
استادیار دانشکده مهندسی معدن، دانشگاه صنعتی سهند
AUTHOR
آرش
نوذری
s.chehreghani@ut.ac.ir
4
دانش آموخته کارشناسی ارشد استخراج، دانشکده مهندسی معدن، دانشگاه تهران
AUTHOR
منابع
1
بخشنده امنیه، ح.، طایی سمیرمی، س.، رحیمی دیزجی، م.، پیرمرادیان، ح.، 1393. تحلیل پایداری سیستم نگهداری تونل بلند سد سردشت با روش همگرایی - همجواری و معیار شکست هوک – براون. زمین شناسی مهندسی (انجمن مهندسی زمینشناسی ایران)، ۷، شماره ۱ و ۲، ۸۳-۹۲.
2
بهزادی نژاد، ح.، فرامرزی، ل.، داربر، م.، 1396. تحلیل پایداری و طراحی سیستم نگهداری موقت محل انشعاب تونل های پنستاک از تونل انتقال آب سد رودبار لرستان با استفاده از نرم افزار FLAC 3D. مجله روش های تحلیلی و عددی در مهندسی معدن، 7(شماره 13)، 113-123.
3
ترکمان جو، ک.، نجفی،م.، قلیچ زاده، ج.، مهرنهاد، ح.، 1397. برآورد حداقل فشار نگهدارنده جبههکار ناهمگن تونلسازی مکانیزه با استفاده از روش های تحلیلی و عددی، مطالعه موردی: مترو تهران، خط 7، نشریه زمین شناسی مهندسی (انجمن مهندسی زمینشناسی ایران)، ۱۱، ۳، ۴۷-۶۰.
4
سبزواری ده کبود، ب.، فلاح، ا.، مشرفی فر، م. و امامی، ع.، 1397. تحلیل پایداری و طراحی سیستم نگهدارنده تونل آب بر سد معشوره. نشریه زمین شناسی مهندسی (انجمن مهندسی زمین شناسی ایران)، ۱۰، شماره ۱ و ۲، ۹۷-۱۱۱.
5
شرکت ایتوک ایران، ۱۳۸۶. گزارش پیشرفت کار شماره ۴ پروژه مکانیک سنگ معدن انگوران زنجان، مطالعات مکانیک سنگ در معدن روباز سرب و روی انگوران.
6
شرکت تهیه و تولید مواد معدنی ایران، 1395. طراحی تفصیلی استخراج معدن زیرزمینی سرب و روی انگوران.
7
شریف زاده، م.، شهریار ، ک. و اشرفی، ع.، ۱۳۸۷. تحلیل پایداری و طراحی سیستم نگهداری تونل بازکننده معادن زیرزمینی بوکسیت جاجرم، دومین کنفرانس مهندسی معدن ایران، تهران، دانشگاه تهران.
8
غفوری، م.، لشکری پور، غ.، طریق ازلی، ص.، 1387. ارزیابی خصوصیات ژئومکانیکی توده های سنگ مسیر تونل انتقال سد درونگر جهت طراحی سیستم نگهدارنده. نشریه زمین شناسی مهندسی-انجمن زمین شناسی، شماره ، 1-14.
9
قزوینی، م.، قزوینیان، ع.، 1392. تحلیل پایداری و طراحی سیستم نگهداری تونل های آب بر سد گتوند علیا." مجله زمین شناسی ژئوتکنیک (زمین شناسی کاربردی، دوره 9 ، شماره 2، 123- 133.
10
معینی، ع.، حسینی، م.، شریفی بروجردی، م.، ابتکار، ا.، 1389. تحلیل پایداری و طراحی سیستم نگهداری تقاطع تونل های آب بر با مخازن ضربه گیر سد گتوند علیا، نشریه علمی-پژوهشی مهندسی معدن، 5(10)،. 91-96.
11
Jiang, L., Kong, P., Shu, J. and Fan, K., 2019. “Numerical analysis of support designs based on a case study of a longwall entry”. Rock Mechanics and Rock Engineering, 52(9), pp.3373-3384.
12
Ozturk, C. A., 2013, "Support design of underground openings in an asphaltite mine." Tunnelling and Underground Space Technology n.38, pp. 288-305.
13
Sakurai, S., 1997, "Lessons learned from field measurements in tunneling", Tunnelling and Underground Space Technology, Vol. 12 (4): 453-460.
14
Trinh, N. and Jonsson, K., 2013, “Design considerations for an underground room in a hard rock subjected to a high horizontal stress field at Rana Gruber, Norway”. Tunnelling and underground space technology, 38, pp.205-212.
15
ORIGINAL_ARTICLE
اثر الیاف بازیافتی از تایر فرسوده بر مشخصات مقاومتی و تغییر شکلپذیری شاتکریت
امروزه شاتکریت به عنوان جزئی از سیستمهای پایدارسازی گودبرداریها و شیبها، کاربرد گستردهای در فعالیتهای مهندسی عمران و معدن دارد. در سالهای اخیر تلاشهای گستردهای به منظور بهبود خواص مقاومتی و تغییر شکلپذیری شاتکریت انجام گرفتهاست. از جمله مهمترین این پیشرفتها میتوان به استفاده از انواع الیافها به منظور بهبود رفتار شاتکریت اشاره کرد. شاتکریت مسلح شده بر حسب نوع و مشخصات الیاف، خواص مختلفی را از خود نشان میدهد، به نحوی که برای هر نوع الیاف میتوان مزایا و معایبی را برشمرد. در این پژوهش، نتایج حاصل از مجموعهای از مطالعات آزمایشگاهی به منظور بررسی اثر افزودن الیاف بازیافتی از تایر فرسوده بر خواص مقاومتی، شکلپذیری و قابلیت جذب انرژی شاتکریت ارائه شدهاست. پس از تهیه نمونههای بدون الیاف و مسلح شده با 5/0، 1، 5/1 و 2 درصد الیاف، آزمایشهای مقاومت فشاری تکمحوره، مقاومت کششی برزیلی و مقاومت خمشی سهنقطهای بر روی نمونهها انجام گرفتهاست. نتایج نشان میدهد که بهکارگیری این نوع الیاف در شاتکریت سبب حذف رفتار شکننده آن میشود و قابلیت جذب انرژی شاتکریت را افزایش میدهد. از جمله مزایای بهکارگیری این نوع الیاف در شاتکریت میتوان به گیرداری مناسب الیاف در داخل شاتکریت، وزن کم الیاف در مقایسه با دیگر مسلح کنندهها همچون توری و الیاف فلزی، سهولت پمپاژ و مقاومت بالا در محیطهای اسیدی و مرطوب اشاره کرد. همچنین با توجه به بازیافتی بودن این نوع الیاف، بهکارگیری آن در شاتکریت هم سبب کاهش هزینههای پروژه میشود و هم سبب حل مشکلات زیستمحیطی ناشی از دفن یا سوزاندن این ضایعات در طبیعت خواهد شد.
https://www.jiraeg.ir/article_115333_36a745abacf897057270a1fb852c5af6.pdf
2021-02-19
75
93
شاتکریت الیافی
مشخصات مقاومتی
تغییرشکلپذیری
الیاف بازیافتی از تایر فرسوده
جذب انرژی
بهزاد
خوش
behzad.khosh@modares.ac.ir
1
دانشجوی کارشناسی ارشد مهندسی مکانیک سنگ، دانشگاه تربیت مدرس، تهران
AUTHOR
هادی
عطاپور
atapour@ut.ac.ir
2
عضو هیئت علمی دانشکده مهندسی علوم زمین، دانشگاه صنعتی اراک، اراک
LEAD_AUTHOR
محسن
عباسپور
mohsen.abbaspour@aut.ac.ir
3
دکتری مهندسی عمران، دانشگاه صنعتی امیر کبیر، تهران
AUTHOR
اسماعیلی، م.، قهاری، ع.، 1390. بررسی آزمایشگاهی تأثیر الیاف پلیپروپیلن بر رفتار بتن تراورس، مهندسی عمران مدرس، 12 (3): 91-101.
1
افضلی ننیز، ا.، صفاییان، ر.، پرندیان، ا.، زابلی، گ.، 1397. بررسی مقاومت سایشی و طاقت خمشی شاتکریت حاوی الیاف پلیمری، پنجمین همایش و نمایشگاه سد و تونل ایران.
2
الهی، ا.، 1393. کنترل زمین و نگهداری در معادن، سازمان انتشارات جهاد دانشگاهی واحد مازندران.
3
اورعی, ک.، 1387. نگهداری در معادن، دانشگاه صنعتی امیرکبیر.
4
رویانفر، ع.، 1389. شاتکریت تر و کاربرد آن در تونلسازی، شرکت بینالمللی پیمانکاری استرلتوس (سهامی خاص)، سازمان انتشارات جهاد دانشگاهی.
5
صمدیان، م.، 1385. گزارش بازیافت لاستیک، وزارت صنایع و معادن، معاونت امور تولید.
6
عباسپور، م.، 1398. تاثیر استفاده از ضایعات کارخانه بازیافت لاستیک بر مدول برجهندگی خاکهای دانهای، پایاننامه دکتری، دانشگاه صنعتی امیر کبیر.
7
فهیمیفر، ا.، مهرزاد سلاکجانی، ب.، دوستانی، ع.، محمدی قلعه عزیز، ع.، 1390. تاثیر الیاف فولادی در بهبود خواص مقاومتی و تغییر شکلپذیری شاتکریت، ششمین کنگره ملی مهندسی عمران.
8
کیوانی، ع.، 1380. اصول و تکنولوژی بتن، انتشارات رودکی.
9
مدنی، ح.، 1393. طراحی و اجرای سیستم نگهداری. دانشگاه صنعتی امیرکبیر.
10
مستوفی نژاد، د.، 1395. تکنولوژی و طرح اختلاط بتن. انتشارات ارکان دانش.
11
هادوی، م.، رهبر، ع.، 1398. کاربرد بتنپاشیده در نگهداری سنگ، قرارگاه سازندگی خاتمالانبیاء، قرب نوح (ع).
12
ACI Committee 506. 1990. ACI 506R-90 - Guide to Shotcrete, American Concrete Institute.
13
Bhawani, S., and Rajnish., K.G., 2006. Tunneling in Weak Rocks, El-Sever, London.
14
Brown, W.D., 2005. Standard Practice For Shotcrete Engineering And Design, US Army Corps of Engineers, Washington, DC, USA.
15
Cengiz, O., Turanli L., 2003. Comparative Evaluation of Steel Mesh, Steel Fibre and High Fibre Reinforced Shotcrete in Panel Test, Cement and Concrete 12: 1701–7.
16
EN 12620, 2002. Aggregates for Concrete, British Standard Institute.
17
Hoek, E., Kaiser P.K., Bawden W.F., 2000. Support of Underground Excavations in Hard Rock. CRC Press.
18
Hondros, G., 1959. The Evaluation of Poisson’s Ratio and the Modulus of Materials of Low Tensile Resistance by the Brazilian (Indirect Tensile) Test with Particular Reference to Concrete, Australian J. Appl. Sci. 10 (3): 243–68.
19
Kuesel, T.R., King, E.H., Bickel, J.O., 2012. Tunnel Engineering Handbook. Springer Science & Business Media.
20
Markides, Ch.F., and Kourkoulis, S.K., 2012. The Stress Field in a Standardized Brazilian Disc: The Influence of the Loading Type Acting on the Actual Contact Length.” Rock Mechanics and Rock Engineering 45 (2): 145–58.
21
Thomas, A., 2008. Sprayed Concrete Lined Tunnels. CRC Press.
22
Ulusay, R., Hudson, J.A., 1978. ISRM Suggested Methods for Determining Tensile Strength of Rock Materials, Int J Rock Mech Min Sci Geomech Abstr 15: 99–103.
23
ORIGINAL_ARTICLE
آنالیز قابلیت اعتماد سد خاکی با استفاده از یک روش ترکیبی جدید-مطالعه موردی
تجزیه و تحلیل احتمالاتی پایداری شیروانی ابزاری برای در نظر گرفتن عدم قطعیت پارامترهای خاک در طراحی است. در این مقاله با استفاده از نرم افزار Slide ، از شبیه سازی مونت کارلو به عنوان روشی تحلیلی برای تهیه مدلهای احتمالاتی پایداری شیروانی بر مبنای روشهای تعادل حدی استفاده شده است. روشهای تعادل حدی به عنوان روشهای رابج در تحلیل پایداری شیروانی میباشند که با استفاده از نیروهای برشی در سطح لغزش تحلیل را انجام میدهند. در این تحقیق پارامترهایی که در مدلسازی احتمالاتی دارای عدم قطعیت هستند عبارتند از زاویه اصطکاک داخلی، چسبندگی و وزن مخصوص خاک که در مدلسازی به صورت تابع توزیع نرمال در نظر گرفته شدهاند. در این تحقیق، برای نشان دادن قابلیت مدلهای ارائه شده از دادههای میدانی به دست آمده از سد رودبار لرستان (به عنوان مطالعه موردی) در ایران استفاده شده است. نتایج به دست آمده نشان میدهد که ترکیب روشهای شبیهسازی مونت کارلو و روشهای تعادل حدی برای ارزیابی پایداری شیروانیها بطور موفقیت آمیزی قابل استفاده است.
https://www.jiraeg.ir/article_115334_ec2d380cc889f028a4c77c84ea3a83b9.pdf
2021-02-19
95
110
قابلیت اعتماد
سد خاکی
پایداری شیروانی
شبیهسازی مونتکارلو
روشهای تعادل حدی
هادی
فتاحی
h.fattahi@arakut.ac.ir
1
دانشکده مهندسی علوم زمین دانشگاه صنعتی اراک
LEAD_AUTHOR
معین
شیرمحمدی
iron.azar@gmail.com
2
دانشجو، دانشکده مهندسی علوم زمین، دانشگاه صنعتی اراک
AUTHOR
حسین
قائدی
ghaedi.hossein@gmail.com
3
دانشجو، دانشکده مهندسی علوم زمین، دانشگاه صنعتی اراک
AUTHOR
Alonso E.E., 1976, "Risk analysis of slopes and its application to slopes in Canadian sensitive clays", Geotechnique, 26: 453-472.
1
Bhattacharya G., Jana D., Ojha S., Chakraborty S., 2003, "Direct search for minimum reliability index of earth slopes", Computers and Geotechnics, 30: 455-462.
2
Cao Z., Wang Y., Li D. (2017) "Practical reliability analysis of slope stability by advanced Monte Carlo simulations in a spreadsheet". In: Probabilistic Approaches for Geotechnical Site Characterization and Slope Stability Analysis. Springer, pp 147-167
3
Cho S.E., 2013, "First-order reliability analysis of slope considering multiple failure modes", Engineering Geology, 154: 98-105.
4
Christian J.T., Ladd C.C., Baecher G.B., 1994, "Reliability applied to slope stability analysis", Journal of Geotechnical Engineering, 120: 2180-2207.
5
Dodagoudar G., Venkatachalam G., 2000, "Reliability analysis of slopes using fuzzy sets theory", Computers and Geotechnics, 27: 101-115.
6
Erzin Y., Cetin T., 2013, "The prediction of the critical factor of safety of homogeneous finite slopes using neural networks and multiple regressions", Computers & Geosciences, 51: 305-313.
7
Farah K., Ltifi M., Hassis H., 2011, "Reliability analysis of slope stability using stochastic finite element method", Procedia Engineering, 10: 1402-1407.
8
Giasi C., Masi P., Cherubini C., 2003, Probabilistic and fuzzy reliability analysis of a sample slope near Aliano, Engineering Geology, 67: 391-402.
9
Hammah R., Yacoub T., Curran J. "Probabilistic slope analysis with the finite element method". In: 43rd US Rock Mechanics Symposium & 4th US-Canada Rock Mechanics Symposium, 2009. American Rock Mechanics Association,
10
Hong H., Roh G., 2008, "Reliability evaluation of earth slopes", Journal of geotechnical and geoenvironmental engineering, 134: 1700-1705.
11
Jha S.K., 2015, "Effect of spatial variability of soil properties on slope reliability using random finite element and first order second moment methods", Indian Geotechnical Journal, 45: 145-155.
12
Johari A., Fazeli A., Javadi A., 2013, "An investigation into application of jointly distributed random variables method in reliability assessment of rock slope stability", Computers and Geotechnics, 47: 42-47.
13
Kacewicz M., 1987, "Fuzzy slope stability method", Mathematical Geology, 19: 757-767.
14
Li D.-Q., Jiang S.-H., Cao Z.-J., Zhou W., Zhou C.-B., Zhang L.-M., 2015, "A multiple response-surface method for slope reliability analysis considering spatial variability of soil properties", Engineering Geology, 187: 60-72.
15
Li D.-Q., Xiao T., Cao Z.-J., Phoon K.-K., Zhou C.-B., 2016, Efficient and consistent reliability analysis of soil slope stability using both limit equilibrium analysis and finite element analysis, Applied Mathematical Modelling, 40: 5216-5229.
16
Li D., Chen Y., Lu W., Zhou C., 2011, "Stochastic response surface method for reliability analysis of rock slopes involving correlated non-normal variables", Computers and Geotechnics, 38: 58-68.
17
Liang L., Xue-song C., 2012, "The location of critical reliability slip surface in soil slope stability analysis", Procedia Earth and Planetary Science, 5: 146-149.
18
Low B., Lacasse S., Nadim F., 2007, "Slope reliability analysis accounting for spatial variation", Georisk, 1: 177-189.
19
Malkawi A.I.H., Hassan W.F., Abdulla F.A., 2000, "Uncertainty and reliability analysis applied to slope stability", Structural Safety, 22: 161-187.
20
Phoon K.-K. (2008) Reliability-based design in geotechnical engineering: computations and applications. CRC Press,
21
Radhi M.M., Pauzi N.M., Omar H. "Probabilistic approach of rock slope stability analysis using Monte Carlo simulation". In: International Conference in Construction and Building Technology, Malayzya, 2008.
22
Saboya Jr F., da Glória Alves M., Pinto W.D., 2006, "Assessment of failure susceptibility of soil slopes using fuzzy logic", Engineering Geology, 86: 211-224.
23