انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Effects of engineering geological properties of Gachsaran Formation gypsum on karst development (Khuzestan, Ramhormoz)بررسی تأثیر ویژگیهای زمینشناسی مهندسی ژیپسهای سازند گچساران در گسترش اشکال انحلالی11668329FAمحمد حسین قبادیاستاد گروه زمین شناسی د انشگاه بوعلی سینا همدانمحمد محمدیاندانشجوی کارشناسی ارشد زمینشناسی مهندسی دانشگاه بوعلی سینا همدانحسن محسنیدانشیار گروه زمینشناسی دانشگاه بوعلی سینا همدانرامین کرمیدانشجوی دکتری زمینشناسی مهندسی دانشگاه فردوسی مشهد و عضو هیات علمی دانشگاه شهید چمران اهوازJournal Article20110929Karstification develops in gypsum easily due to high solubility. In this paper, determine geological engineering properties of Gachsaran Formation gypsum from Ramhormoz area and has been related with karst development by petrological and rock mechanic studies. ANFIS as combines fuzzy logic and neural networks in the form of neuro-fuzzy method were used for detect type of gypsum. Input data include uniaxial compression strength, tensile strength, durability Index and porosity percentage from 80 laboratory samples. ANFIS was built model that with little knowledge of rock, was able to predict the type of rock. Based on petrographic studies, Gachsaran Formation gypsum with two different textures has been considered, fine grained (alabastrine) and coarse grained (porphyritic) gypsum. The results indicate that texture, especially grain size and shape, is an important parameter controlling the differences in the mechanical properties of the two gypsum types studied. Based on intact rock engineering classification, alabastrine gypsum and porphyritic gypsum classification as DH and EH category respectively. Alabastrine gypsum than porphyritic gypsum has more unconfined compressive strength, tensile strength, solubility and brittle behavior so karstic phenomena such as dissolution sinkhole , karstic wells(jamas), natural roof and caves are more spread in them. Porphyritic gypsum than alabastrine gypsum have more slake durability and less strength so collapse and subsidence sinkholes are more spread also karren and pinnacles are bigger in them.پدیده کارست در ژیپسها به دلیل قابلیت انحلال زیاد به آسانی توسعه پیدا میکند. در این پژوهش با استفاده از مطالعات سنگشناسی و تعیین خصوصیات فیزیکی و مکانیکی نمونههای ژیپس سازند گچساران در منطقه رامهرمز، رابطه بین خصوصیات زمینشناسی مهندسی ژیپس با چگونگی توسعه اشکال انحلالی بررسی گردیده است. برای تعیین نوع سنگ ژیپس از (Adaptive Neuro-Fuzzy Inference System) ANFIS به عنوان ترکیبی از منطق فازی با شبکههای عصبی در قالب روشهای Neuro-Fuzzy استفاده شد. پارامترهای ورودی این مدل شامل مقاومت تراکمی تک محوره، مقاومت کششی، شاخص دوام سیکل اول و درصد تخلخل 80 نمونه آزمایشگاهی میباشند. با استفاده از ANFIS مدلی ساخته شد که با داشتن اطلاعات اندکی از سنگ، قادر به پیشبینی نوع سنگ خواهیم بود. با توجه به مطالعات سنگشناسی، ژیپسهای سازند گچساران در دو نوع آلاباستر (دارای بافت ریزدانه) و پورفیریتیک (دارای بافت درشتدانه) تقسیمبندی شدهاند. نتایج نشان داد که بافت سنگ، بهویژه شکل و اندازه دانهها، یک پارامتر مهم کنترلکننده خصوصیات مکانیکی ژیپسهای مذکور میباشد. با توجه به ردهبندی مهندسی سنگ بکر، ژیپس آلاباستر در رده سنگ ضعیف با نسبت مدولی زیاد (DH) و ژیپس پورفیریتیک در رده سنگ بسیار ضعیف بانسبت مدولی زیاد (EH) قرار میگیرند. ژیپس آلاباستر نسبت به ژیپس پورفیریتیک دارای مقاومت تراکمی، مقاومت کششی و قابلیت انحلال بیشتری بوده و رفتار شکنندهتری از خود نشان میدهد. به همین علت پدیدههای کارستی همچون فروچاله انحلالی، چاههای کارستی، طاقهای طبیعی و غار در آنها گسترش بیشتری دارند. ژیپس پورفیریتیک دوام شکفتگی بیشتر و مقاومت کمتری نسبت به ژیپس آلاباستر دارد. به همین دلیل فروچالههای فرونشستی و فروریزشی در آنها توسعه زیادتری دارد. همچنین کارنها و برجهای انحلالی در آنها با ابعاد بزرگتری شکل میگیرند.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Application of 2D electrical resistivity for geometry investigation
of Noghol-Semirom landslideکاربرد مقاومت ویژه الکتریکی دو بعدی در شناسایی هندسه زمینلغزش نقل، سمیرم173268330FAاحمد قربانیاستادیار ژئوفیزیک اکتشافی دانشکده مهندسی معدن و متالورژی، دانشگاه یزد،مهدی بمانی2. دانشجوی دوره دکتری، دانشکده مهندسی معدن و متالورژی، دانشگاه یزد،عبدالحمید انصاریدانشیار ژئوفیزیک اکتشافی دانشکده مهندسی معدن و متالورژی، دانشگاه یزد،حسینعلی قاریدانشجوی دوره دکتری، مؤسسه ژئوفیزیک دانشگاه تهران، دانشگاه یزدJournal Article20131124The Noghol landslide is located in Padena region in Semirom area in Isfahan province, Iran. The Noghol Landslide has a triangle form with a movement by E-W direction. The overall movement in landslide is from east to west toward to the Dengezloo river. The area influenced by the movement of landslide is about 600 by 700m. Landslide is occurred in the Bakhtiyari formation (massive to thick-bedded conglomerate with interbedded sandstone and marl belong to Cenozoic era). ERT surveying is carried out on the six profiles (parallel and perpendicular to the landslide direction) using a Dipole–dipole array. The total length of traverses is about 3 kilometres. Landslide is limited by a fault (strike NW-SE) from the north side and a permanent river from the west side of landslide. Conglomerate and marl are placed on the north and south sides of the fault, respectively. ERT survey yielded important information about the geometry and characteristics of the landslide. ERT results also show that two main sliding surfaces are present in Noghol landslide: a sliding surface in depths shallower than 20 m. On the outcrop of marl formation, normally, weathered surface creates a sliding surface. The second is a sliding surface in nearly 50 m depth. Here, right flank of landslide is formed by fault. Sliding surface is created when marl formation is partially saturated. So, both shallow and deep-seated landslide can be recognized in studied landslide. This information is confirmed by geological and borehole investigations<em>.</em>زمینلغزش نقل واقع شده در منطقه پادنای سمیرم در نزدیکی روستای نقل در 70 کیلومتری جنوب شهر حنا، رخ داده است. این زمینلغزش مثلث شکل است. قاعده آن با طول حدود 700 متر در سمت غرب و به سمت رودخانه دنگزلو (از سرشاخههای رودخانه ماربر)، و فاصله راس آن تا قاعده تقریباً 600 متر است. جهت حرکت کلی توده لغزشی نیز از شرق به غرب، و به طرف رودخانه میباشد. زمینلغزش در سازند بختیاری متشکل از کنگلومرا با میان لایههای مارنی رخ داده است. وضعیت زمینشناسی زیرسطحی محدوده زمینلغزش توسط برداشتهای مقاومت ویژه الکتریکی دو بعدی با آرایه دوقطبی-دوقطبی مورد مطالعه قرار گرفت. به این منظور سه خط برداشت در جهت حرکت زمینلغزش و سه خط برداشت در جهت عمود بر جهت حرکت زمینلغزش با فواصل مساوی، در مجموع به طول 3 کیلومتر طراحی و بر روی آنها اندازهگیریهای مقاومت ویژه الکتریکی صورت گرفت. نتایج مطالعه مقاومت ویژه الکتریکی دو بعدی، وجود لایه مارنی با ضخامت بیش از 50 متر در تمام محدوده زمینلغزش را نشان میدهد. ضلع شمالشرقی زمینلغزش توسط گسل محدود شده است، به طوری که شمال شرق آن کنگلومرا و جنوب غرب آن رخنمون مارن قرار دارد. وجود مارن در نزدیکی سطح زمین و در عمق باعث ایجاد دو مکانیزم لغزش یکی نزدیک سطح و دیگری در عمق بیشترشده است. سطح لغزش نزدیک سطح در عمق کمتر از 20 متر شناسایی شده است در حالی که سطح لغزش عمیق در عمق حدود 50 متر قابل تشخیص است. نتایج حاصل از مقاومت ویژه الکتریکی دوبعدی با نتایج چاهکهای حفر شده مطابقت دارد.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Evaluation and zonation of liquefaction potential of coastal deposits
(case study: coastal region of southern Pars gas-field)ارزیابی و پهنهبندی توان روانگرایی نهشتههای ساحلی (محدوده ساحلی میدان گازی پارس جنوبی)334668331FAعباسعلی محمدیکارشناسی ارشد زمینشناسی مهندسی، دانشگاه تربیت مدرسعلی ارومیه ایاستاد گروه زمین شناسی دانشگاه اربیت مدرسکاظم مرادی هرسینیشرکت مهندسین مشاور سازهپردازی ایرانJournal Article20130626<strong> </strong> <br />Liquefaction is considered as natural hazard that directly affect the stability of infrastructures projects. The potential of liquefaction for an area is controlled by many factors including the type of soil, water presence and the seismicity risk. South Pars region is located to the southern part of Bosheher Province which is recognized as developed industrial area and include many lifeline and sensitive projects. From the geological point of view, the study area is formed as an alluvial fan which consists of loose and young deposits that is a mixture of clay, silt, sand and gravel layers. <br />In this research, investigation reports of the phases 12, 14, 19 and many related reports of the coastal part of southern Pars Gas-field were collected and studies. The N values calculated from SPT tests and other geotechnical data for 60 boreholes were used to evaluate the liquefaction potential of the sand layers. Due to the large amount of the reviewed data, the information of only 16 boreholes were presented in this paper. <br />The results showed that during the event of large earthquake of magnitude of 7 on the Richter scale and production of horizontal acceleration at 0.3g, liquefaction occurrence in the region at phases 12 and 19 is possible. Based on the calculation of liquefaction potential index (LPI), the results showed that by approaching the coast line the potential of liquefaction of sand deposits is increased due to high percentage of soil saturation. In contrast, by distancing from the coast line towards the land this potential is decreased due the increment of soil gradation.پدیده روانگرایی یکی از مخاطرات زمینشناسی به شمار میآید که تأثیر مستقیم در پایداری سازههای زیربنایی دارد. امکان بروز پدیده روانگرایی در یک منطقه به وسیله عواملی مانند خصوصیات خاک، نحوه حضور آب زیرزمینی و توان لرزهخیزی ارزیابی میشود. منطقه پارسجنوبی در قسمت جنوبی استان بوشهر یکی از مناطق توسعه یافته صنعتی است که تعدادی سازههای زیربنایی حیاتی و حساس در آن وجود دارد. از دیدگاه زمینشناسی منطقه مورد مطالعه در یک محیط مخروط افکنهای تشکیل شده که دربرگیرنده نهشتههای سست و ناپیوسته جوان با ترکیبی از رس، سیلت، ماسه و شن میباشد.<br /> در این تحقیق گزارشهای مطالعاتی فازهای 12، 14و 19 و سایر گزارشهای مربوط به توسعه تجهیزات ساحلی پارسجنوبی جمعآوری شده و مورد مطالعه قرار گرفتند. عدد نفوذ استاندارد اندازهگیری شده در 60 گمانه به همراه سایر اطلاعات ژئوتکنیکی جهت ارزیابی توان روانگرایی لایههای ماسهای منطقه مورد استفاده قرار گرفتند. باتوجه به حجم زیاد دادهها در این مقاله اطلاعات 16 گمانه منعکس شده است.<br /> بررسیها نشان دهنده این است که در محدوده فازهای مطالعاتی 12 و 19 در اثر وقوع یک زلزله با بزرگی 7 ریشتر و شتاب افقی g 3/0 امکان بروز پدیده روانگرایی وجود دارد. پهنهبندی انجام شده بر اساس شاخص توان روانگرایی نشان دهنده این امر است که با نزدیک شدن به خط ساحلی و با اشباع شدن خاکهای ماسهای خطر روانگرایی بیشتر شده و با دور شدن از ساحل خطر نسبی روانگرایی کاهش می یابد.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Modeling of subsidence in south Pars as field using analytical and semi analytical methodsمدلسازی فرونشست میدان پارسجنوبی با روشهای تحلیلی و نیمه تحلیلی475868332FAمحمود فاطمی عقدااستاد گروه زمین شناسی دانشگاه خوارزمیاکبر قاضی فردگروه زمینشناسی، دانشکده علوم، دانشگاه اصفهان، اصفهان، ایرانمحمدحسین طاهرینیاگروه زمینشناسی، دانشکده علوم، دانشگاه خوارزمی، تهران، ایرانJournal Article20130221Exploitation of hydrocarbon reservoir would cause decrease in pore pressure and increase of effective stress applied to reservoir rock, which result in compaction of reservoir. If the reservoir compaction exceeds certain limit, the overburden rocks of reservoir due to their weights begin to subside. With respect to the importance of South Pars gas field which belongs to Iran and Qatar, calculation and modeling of field surface subsidence is very important. In this paper for determination of South Pars Gas field subsidence, at first, the reservoir compaction with use uniaxial compaction theory was calculated and then the effect of this compaction on the field surface with use analytical and semi analytical method was modeled. The amount of South Pars reservoir compaction at the end of production period reached up to 0.5 meter and according to the results of two subsidence modeling methods, maximum subsidence value will reach to over 0.6 meter. برداشت از مخازن نفت و گاز افت فشار منفذی این مخازن را به دنبال خواهد داشت و در نتیجه میزان فشار مؤثر ناشی از وزن سنگهای روبارهی مخزن افزایش یافته و باعث تراکم مخزن میگردد. در صورتیکه میزان تراکم سنگ مخزن از حد معینی فراتر رود سنگهای روباره در اثر وزن خود شروع به فرونشست خواهند کرد. با توجه به اهمیت میدان گازی پارسجنوبی و مشترک بودن این میدان بین ایران و قطر، محاسبه و مدلسازی فرونشست سطح میدان که میتواند تأثیر بسزایی در عملیات بهرهبرداری از این میدان داشته باشد از اهمیت بالای برخوردار است. در این پژوهش ابتدا با استفاده از تئوری تراکم تکمحورهی، تراکم مخزن پارسجنوبی در انتهای دورهی برداشت محاسبه شده و سپس با استفاده از روش مدلسازی تحلیلی و نیمهتحلیلی (با استفاده از نرمافزار AEsubs) فرونشست ایجاد شده در سطح میدان در اثر تراکم مخزن تعیین گردید. بر اساس مطالعات انجام شده مقدار تراکم مخزن پارس جنوبی در پایان دورهی برداشت در حدود 5/0 متر و بیشنه فرونشست ایجاد شده در سطح این میدان بر اساس دو روش مدلسازی بیش از 6/0 متر برآورد گردیده است.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Evaluation of indentation method in determining fracture toughness of rocksارزیابی روش دندانهگذاری در تعیین چقرمگی شکست سنگ596868334FAمهدی زارع نجفآبادی1. آزمایشگاه تحقیقاتی خستگی و شکست، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، تهرانمجیدرضا آیت اللهیآزمایشگاه تحقیقاتی خستگی و شکست، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، تهرانJournal Article20121211Fracture toughness is an important parameter in some applications related to rock masses like fracture of rock, hydraulic fracturing process, design and manufacturing of tunneling apparatus. Different methods have been proposed for determining fracture toughness of quasi-brittle materials including the indentation test. In this research, the properties of some rocks with different textures (grain size and shape) are examined in the indentation test. Then applicability of the indentation method in determining fracture toughness of rocks is evaluated. It is shown that rocks exhibit two different types of behavior in the indentation test. For forces less than a critical force, rocks behave in accordance with other brittle materials, while for loads more than the critical force, the rocks behave completely in contrast with other brittle materials. This difference makes the indentation method an unsuitable option for determining fracture toughness of rocks. The main reason for this difference could be the presence of inherent defects in rocks.چقرمگی شکست سنگ یکی از پارامترهای مکانیکی مهم در برخی از کاربردهای مربوط به تودههای سنگی مانند فرآیند شکست در سنگ، فرآیند شکست هیدرولیکی، طراحی و ساخت ماشینآلات حفاری میباشد. با این وجود برای اندازهگیری این پارامتر روشهای آزمایشگاهی مختلفی وجود دارد. یکی از روشهای آزمایشگاهی ارائه شده در این زمینه، روش دندانهگذاری میباشد. در این تحقیق، در ابتدا رفتارچند سنگ مختلف از نظر نوع و اندازه دانهبندی، در آزمایش دندانهگذاری بررسی شده و در ادامه عملی بودن این روش در تعیین چقرمگی شکست آنها ارزیابی میشود. با توجه به نتایج بدست آمده میتوان گفت که سنگها در آزمایش دندانهگذاری رفتار دوگانهای را از خود نشان میدهد. برای نیروهای کمتر از بار بحرانی، رفتار سنگ مشابه با مواد ترد دیگر بوده ولی برای نیروهای بیشتر از بار بحرانی، رفتار سنگهای آزمایش شده به طور کلی متفاوت با مواد ترد دیگر میباشد. این تفاوت در رفتار باعث میشود که نتوان از روش دندانهگذاری برای تعیین چقرمگی شکست آنها استفاده کرد. دلیل اصلی این تفاوت را میتوان ناشی ازبرخی عیوب ساختاری ذاتی در سنگها دانست.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Correlation of microscopic mineralogical and textural properties versus physical and mechanical properties of gabbroic and diorite rocks in Natanz areaارتباط خواص کانیشناسی و بافتی میکروسکوپی با خصوصیات فیزیکی و مکانیکی سنگهای گابرو و دیوریت نطنز697868335FAمسعود ترکان1. دانشجوی کارشناسی ارشد مکانیک سنگ، دانشکده مهندسی معدن، دانشگاه صنعتی اصفهانمحمدرضا ایراننژادیاستادیار دانشکده مهندسی معدن، دانشگاه صنعتی اصفهانعلیرضا باغباناندانشیار دانشکده مهندسی معدن، دانشگاه صنعتی اصفهانJournal Article20130828Microscopic and geomechanical properties of construction igneous rocks include the degree of alteration, the presence of microfractures, peak strength, porosity, the proportion of detrimental minerals, etc. As reported in the literature, porosity in igneous rocks has a significant negative on the peak strength of rock samples. In this research, samples of gabbro and diorite rocks from a construction stone quarry in west of Natanz were selected and subject to microscopic and geomechanical investigations. As per thin section investigations, the degree of alteration, the presence of microfractures, and the minerals detrimental to the strength of construction stones were studied. Therefore, the geomechanical experiments including determination of density, porosity, durability index, the Brazilian and triaxial tests were conducted. The obtained data were compared to standard values and consequently a qualitative correlation between strength and microscopic properties was detected, accentuating the importance of microscopic studies in the investigations upon construction stones. The correlation thereupon may be applied in the different stages of exploration, exploitation, and processing of the construction stones and in order to avoid prodigious costs and destruction in the environment and domestic resources. خصوصیات میکروسکوپی و ژئومکانیکی سنگهای ساختمانی آذرین شامل مواردی از جمله میزان دگرسانی، وجود ریزدرزهها، مقاومت نهایی، تخلخل، میزان کانیهای مضر و ... میباشد. براساس پژوهشهای قبلی، تخلخل در سنگهای آذرین به شدت بر روی مقاومت نهایی نمونهی سنگی تأثیرگذار بوده و آن را کاهش میدهد. در این تحقیق یک نمونه سنگ گابرویی و یک نمونه سنگ دیوریتی متعلق به یکی از معادن سنگ ساختمانی غرب نطنز انتخاب شدند و مورد بررسیهای میکروسکوپی و ژئومکانیکی قرار گرفتند. با توجه به مطالعات مقاطع نازک سنگ میزان دگرسانی، وجود ریزدرزهها و کانیهای مضر مؤثر بر روی استحکام سنگهای ساختمانی برآورد گردید. سپس آزمایشهای ژئومکانیکی مانند تعیین چگالی، تخلخل، شاخص دوام، آزمون کشش برزیلی و مقاومت سه محوره مطابق استانداردهای ISRM انجام شد. دادههای حاصل با مقادیر استاندارد تطبیق داده شد و پس از آن رابطهی کیفی بین مقاومت و خواص میکروسکوپی مشاهده شد که بیانگر اهمیت مطالعات میکروسکوپی سنگهای ساختمانی میباشد. از رابطهی به دست آمده میتوان در مراحل اکتشاف، استخراج و فرآوری سنگهای ساختمانی بهره جست و از صرف هزینههای گزاف، تخریب محیطزیست و منابع ملی که پیامد حذف این مطالعات میباشد، جلوگیری به عمل آورد.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Laboratory investigating of mixed soil-shred tire behavior for application
in railway track subgradeبررسی آزمایشگاهی رفتار خاک مخلوط با خردهلاستیک به منظور بکارگیری در بستر خطوط ریلی798868336FAمرتضی اسماعیلیدانشیار دانشگاه علم و صنعت ایران، دانشکده مهندسی راهآهننوید نخعی2. کارشناسی ارشد دانشگاه علم و صنعت ایران، دانشکده مهندسی راهآهنJournal Article20130207One of the suggested applications for use of waste tire is mixing of this material with soils in shredded form for use in retaining walls backfill and embankments. In this regard, comprehensive studies have been accomplished in the field of road engineering but no research works could be found in the railway engineering. As one of the important parameters is railway embankment design is Ev2 (modulus of elasticity in the second loading cycle in PLT) so this research is devoted to investigating of physical and mechanical behavior of soil mixed with shred tire. For his purpose by using the GW-GC as a base material which can be used in railway embankment and subgrade, it is mixed with three different percent 5, 10 and 15 of shred tire with range of aggregation 0.475 to 2.5 centimeters. In continue a series of physical and mechanical tests are performed on base soil and soil mixed with shred tire including compaction, sand equivalent, CBR, direct shear test. In the last stage of the laboratory investigations four cyclic plate loading tests are performed in loading chamber box with dimensions of 2.5×2.5×1.2 m respect to base soil and it mix with 5, 10 and 15 percent shred tire. It should be notified that the soil in all four tests the soil are compacted based on guidelines of ASTM D6270-2006. The plate dimensions in PLT test are considered as 30×30 cm. The obtained results indicate that due to increase in shred tire percentage in the range of 5 to 15 percent, the maximum dry density decreases form 11.86 to 19.36 percent respect to the base soil. On the other hand the CBR value show 34.35 to 67.47 percent and Shear strength parameters such as cohesion the First, increased to 2.1 percent, but then decreased back to levels 27.1 percent and Angle of internal friction value has been reduced by 10.8 to 21.67 percent decrease in the mentioned range. <br />Focusing on the obtained Ev2 values in PLT tests reveals a decrease of 27.54 to 54.29 percent in this matter. Comparing the achieved Ev2 results with those proposed by UIC R719-1996 code confirms the limitation of shred tire application to 10 percent for use in subgrade layer while its use in embankment is forbidden.از جمله کاربردهای پیشنهادی برای بکارگیری لاستیک فرسوده مخلوط کردن این مصالح به فرم خرده شده با مصالح خاکی و بکارگیری در پشت دیوارهای حائل و خاکریزها میباشد. در این خصوص مطالعات جامعی در حوزه مهندسی راه صورت گرفته ولیکن در حوزه مهندسی راهآهن تحقیق مشخصی انجام نشده است. با توجه به آنکه در بستر و خاکریز خطوط ریلی یکی از پارامترهای کلیدی، مدول ارتجاعی در دومین مرحله بارگذاری(Ev<sub>2</sub>) است. لذا در تحقیق حاضر مخلوطی از خاک GW-GC با مقادیر0، 5، 10و 15درصد خردهلاستیک با محدوده دانهبندی 475/0 تا 5/2 سانتیمتر تحت یکسری آزمایشهای استاتیکی فیزیکی و مکانیکی شامل تراکم، همارز ماسه، ظرفیت باربری کالیفرنیا، برش مستقیم و بارگذاری صفحه مرحلهای قرار گرفته و سپس در اتاقک بارگذاری به ابعاد 1.2×5/2×5/2 متر، ریخته و به تراکم حداکثر آزمایشگاهی مطابق استاندارد ASTM D6270-2006 رسانده شده است. در ادامه با استفاده از جک 30 تن، بارگذاری در سه گام و به صورت مرحلهای بر روی صفحه مربعی به ابعاد 30×30 سانتیمتر صورت گرفته است. نتایج آزمایش بیانگر آن است که در مقایسه با خاک بدون خردهلاستیک کاهش وزن مخصوص به میزان 86/11 تا 36/19 درصد، ظرفیت باربری کالیفرنیا به میزان 35/34 تا 47/67 درصد، پارامترهای مقاومت برشی همچون چسبندگی در ابتدا به مقدار 1/2 درصد افزایش یافته ولی پس از آن مجدداً به میزان 1/27 درصد کاهش پیدا کرده و زاویه اصطکاک داخلی به میزان 8/10 تا 62/21 درصد کاهش داشته است و مقدار E<sub>v2</sub> به میزان 54/27 تا 29/54 درصد کاهش را به دنبال داشته است. با مقایسه نتایج بدست آمده با مقادیر مجاز آییننامهی UIC R719-1996 مشخص گردید که حداکثر تا 10 درصد از خردهلاستیک را میتوان بصورت مخلوط با مصالح بستر مورد استفاده قرار داد لیکن استفاده از آن بعنوان بخشی از بدنه خاکریز توصیه نمیشود.انجمن زمین شناسی مهندسی ایراننشریه انجمن زمین شناسی مهندسی ایران2228-52456شماره 3 و 420140220Estimation of uniaxial compressive strength of limestone marls from Abderaz formation by using physical propertiesتخمین مقاومت تراکمی تکمحوری آهکهای مارنی سازند آبدراز با استفاده از خصوصیات فیزیکی899768337FAمعصومه خلیلیدانشجوی دوره کارشناسی ارشد زمینشناسی مهندسی دانشگاه فردوسی مشهدغلامرضا لشکری پوراستاد گروه زمین شناسی مهندسی دانشگاه فردوسیمحمد غفوریدانشگاه فردوسی مشهدمحمد خانه باداستادیار گروه زمینشناسی دانشکده علوم پایه دانشگاه فردوسی مشهدپوریا دهقاندانشجوی دوره دکتری زمینشناسی مهندسی پردیس دانشگاه فردوسی مشهدJournal Article20130626the purpose of this <span style="text-decoration: underline;">study</span> is presenting and <span style="text-decoration: underline;">study</span> of simple equations to estimate the uniaxial compressive strength of marly limestone of Abderaz formation. Many engineering structures such as dam, tunnel and road have been constructed on this formation in the northern part of Khorasan Razavi province. For <span style="text-decoration: underline;">determation </span>physical parameters and uniaxial compressive strength of <span style="text-decoration: underline;">marly limestone</span>, 39 samples according to the International Society of Rock Mechanics Standards <span style="text-decoration: underline;">(1981)</span> of Abderaz formation were collected. Physical properties which determined <span style="text-decoration: underline;">including</span> of porosity, density, water absorption. Results which obtained from the simple regression method, indicating a better relationship between density and uniaxial compressive strength in comparison with the other physical <span style="text-decoration: underline;">properties</span>. The best multivariate correlation is obtained between uniaxial compressive strength with density and water absorption.هدف از این تحقیق ارائه و بررسی روابط ساده و چندمتغیره برای تخمین مقاومت فشاری نمونههایی از سنگ آهکهای مارنی سازند آبدراز است. بر روی این سازند پروژههای مهندسی زیادی مانند سد، تونل و جاده در شمال استان خراسان رضوی احداث شده است. برای این منظور برروی 39 نمونه سنگ آهک مارنی سازند آبدراز مطابق با استاندارد انجمن بینالمللی مکانیک سنگ، آزمایشهای مربوط به تعیین خصوصیات فیزیکی شامل تخلخل، دانسیته، جذب آب انجام شد و روابطی چند متغیره برای تخمین مقاومت فشاری به دست آمد. نتایج به دست آمده از روش رگرسیون ساده، نشان دهندهی کارایی بهتر دانسیته نسبت به دیگر ویژگیهای سنگ در تخمین مقاومت تراکمی تکمحوری است. بهترین رابطهی چندمتغیره نیز به ازای استفاده از متغیرهای مستقل دانسیته و جذب آب برای کل نمونهها به دست آمد.