Abdi Y, Khanlari G.M, Jamshidi A. Correlation between Mechanical Properties of Sandstones and P-Wave Velocity in Different Degrees of Saturation. Geotechnical and Geological Engineering 2018;https://doi.org/10.1007/s10706-018-0721-6.volV()0123456789().,-volV)
Azimian A, Ajalloeian R. Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity. Arabian Journal of Geosciences 2015;8:2069–2079.
Basu A, Kamran M. Point load test on schistose rocks and its applicability in predicting uniaxial compressive strength. International Journal of Rock Mechanics and Mining Sciences 2010;47(5):823–828.
Bieniawski ZT. Point load test in geotechnical practice. Engineering Geology 1975;91:1–11.
Broch E, Franklin JA. Point-load strength test. International Journal of Rock Mechanics and Mining Sciences 1972;6:669–697.
Cargill JS, Shakoor A. Evaluation of empirical methods for measuring the uniaxial compressive strength of rock. International Journal of Rock Mechanics and Mining Sciences 1990;27:495–503.
Cobanoglu I, Celik SB. Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bulletin of Engineering Geology and the Environment 2008;67:491–498.
Fener M, Kahraman S, Bilgil A, Gunaydin O. A comparative evaluation of indirect methods to estimate the compressive strength of rocks. Rock Mechanics and Rock Engineering 2005;38(4):329–343.
Gokceoglu C, Aksoy H. New approaches to the characterization of clay- bearing, densely jointed and weak rock masses. Engineering Geology 2000;58:1–23.
Heidari M, Khanlari G, Torabi-Kaveh M, Kargarian S. Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mechanics and Rock Engineering 2012;45(2):265–273.
ISRM. Rock characterization testing and monitoring. ISRM suggested methods. In: Brown ET (ed), 1981, Pergamon Press, Oxford.
Jalali SH, Heidari M, Zarrinshoja M, Mohseni N. Predicting of uniaxial compressive strength of some igneous and metamorphic rocks by block punch index and cylindrical punch index test. International Journal of Rock Mechanics and Mining Sciences 2019;119:72–80.
Jamshidi A, Nikudel MR, Khamehchiyan M, Zarei Sahamieh R, Abdi Y. A correlation between P-wave velocity and Schmidt hardness with mechanical properties of travertine building stones. Arabian Journal of Geosciences 2016;9(10):1–12.
Jamshidi A, Zamanian H, Zarei Sahamieh R. The effect of density and porosity on the correlation between uniaxial compressive strength and P-wave velocity. Rock Mechanics and Rock Engineering 2018;51(4):1279–1286.
Jamshidi A. A new predictor parameter for production rate of ornamental stones. Bulletin of Engineering Geology and the Environment 2019;78:2565–2574.
Kahraman S. Evaluation of simple methods for assessing the uniaxial compressive strength of rock. International Journal of Rock Mechanics and Mining Sciences 2001;38:981–994.
Kahraman S, Fener M, Kilic CO. A preliminary study on the conversion factor used in the prediction of the UCS from the BPI for pyroclastic rocks. Bulletin of Engineering Geology and the Environment 2016;75:771–780.
Kahraman S, Gunaydin O. The effect of rock classes on the relation between uniaxial compressive strength and point load index. Bulletin of Engineering Geology and the Environment 2009;68(3):345–353.
Karakul H, Ulusay R, Isik NS. Empirical models and numerical analysis for assessing strength anisotropy based on block punch index and uniaxial compression tests. International Journal of Rock Mechanics and Mining Sciences 2010;47:657–665.
Kilic A, Teymen A. Determination of mechanical properties of rocks using simple Methods. Bulletin of Engineering Geology and the Environment 2008;67:237–244.
Kurtulus C, Bozkurt A, Endes H. Physical and Mechanical Properties of Serpentinized Ultrabasic Rocks in NW Turkey. Pure and applied geophysics 2012;169:1205–1215.
Li D, Wong LNY. Point load test on meta-sedimentary rocks and correlation to UCS and BTS. Rock Mechanics and Rock Engineering 2013;46:889–896.
Mishra DA, Basu A. Use of the block punch test to predict the compressive and tensile strengths of rocks. International Journal of Rock Mechanics and Mining Sciences 2012;51:119–127.
Roghanchi P, Kallu RR. Block punch index (BPI) test—a new consideration on validity and correlations for basalt and rhyolite rock types. Journal of Mining Science 2014;50(3):475–483.
Schrier van der JS. The block punch index test. Bulletin of Engineering Geology and the Environment 1988;38:121–126.
Sharma PK, Singh TN. A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bulletin of Engineering Geology and the Environment 2008;67:17–22.
Singh TN, Kainthola A, Venkatesh A. A Correlation Between Point Load Index and Uniaxial Compressive Strength for Different Rock Types. Rock Mechanics and Rock Engineering 2012;45:259–264.
Sonmez H, Tunusluoglu C. New considerations on the use of block punch index for predicting the uniaxial compressive strength of rock material. International Journal of Rock Mechanics and Mining Sciences 2008;45:1007–1014.
Sulukcu S, Ulusay R. Evaluation of the block punch index test with particular reference to the size effect, failure mechanism and its effectiveness in predicting rock strength. International Journal of Rock Mechanics and Mining Sciences 2001;38:1091–1111.
Ulusay R, Gokceoglu C. The modified block punch index test. Canadian Geotechnical Journal 1997;34:991–1001.
Ulusay R, Gokceoglu C, Sulukcu S. Draft ISRM suggested method for determining block punch strength index (BPI). International Journal of Rock Mechanics and Mining Sciences 2001;38:1113–1119.
Yagiz S. P-wave velocity test for the assessment of some geotechnical properties of rock materials. Bulletin of Materials Science 2011;34:943–957.
Yasar E, Erdogan Y. (2004) Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. International Journal of Rock Mechanics and Mining Sciences 2004;41:871–875.
Yesiloglu-Gultekin N, Gokceoglu C, Sezer EA. Prediction of uniaxial compressive strength of granitic rocks by various nonlinear tools and comparison of their performances. International Journal of Rock Mechanics and Mining Sciences 2013;62:113–122.
)