@article { author = {Fattahi Bandpey, Maryam and Hafezi Moghaddas,, naser and Ghafoori, Mohammad and Moussavi Harami, Reza and Kazem Shiroodi, Sadjad}, title = {Geological Engineering Studies of Marine Sediments, Northwestern Persian Gulf}, journal = {Scientific Quarterly Journal of Iranian Association of Engineering Geology}, volume = {14}, number = {1}, pages = {85-95}, year = {2021}, publisher = {Iranian Association of Engineering Geology}, issn = {2228-5245}, eissn = {}, doi = {}, abstract = {Having knowledge about geological and engineering properties of marine sediments, is very important to perform stability analysis of offshore structures. In this paper, the geological engineering characteristics of marine sediments (from seabed to a maximum depth about 30 meters below seabed) was investigated in three oil and gas fields located in the northwestern Persian Gulf. In the first step, geotechnical database of study area was developed based on studies carried out by marine geotechnical labs and oil companies in Persian Gulf. Then, the distribution of physical and mechanical properties of marine sediments with depth and also their relation to the other parameters were studied and some graphs and geological/geotechnical profiles were drawn.The results showed that the physical and mechanical characteristics of these sites are influenced by the distance from the Iranian coast, water depth and distance from Arvand Rud river delta. Generally, from siteI to siteIII, the grains size, and liquid limit of fine-grained and strength of subseafloor sediments were increased. The thickness of soft sediments was decreased from siteI to siteIII. By evaluating the percent of carbonate content, it was found that with distance from the coast, the percent of carbonate content in subseafloor sediments were decreased. So, the least amount of carbonate content was observed in site III. According to the result of PI versus PL/LL graph, Illite is the most abundant clay mineral in the study area.}, keywords = {Persian Gulf,Marine Engineering Geology,Subseafloor sediments}, title_fa = {مطالعه خصوصیات زمین شناسی مهندسی رسوبات دریایی در شمال غرب خلیج فارس}, abstract_fa = {شناخت خصوصیات زمین شناسی و مهندسی رسوبات بستر دریا در رابطه با ارزیابی پایداری سازه های دریایی در میدان های نفت و گاز، از اهمیت قابل توجهی برخوردار می باشد. در این مطالعه، خصوصیات زمین شناسی مهندسی رسوبات دریایی به طور متوسط تا عمق 30 متر از بستر دریا، در سه میدان از میدان های نفت و گاز واقع در شمال غرب خلیج فارس مورد بررسی قرار گرفته است. در مرحله اول بر اساس گزارش ها و اطلاعات شرکت نفت و آزمایشگاه ها و شرکت های ژئوتکنیک دریایی، اقدام به تهیه بانک اطلاعات ژئوتکنیک در محدوده مورد مطالعه گردید. سپس پارامترهای فیزیکی و مکانیکی رسوبات در سایت های مورد مطالعه نسبت به تغییرات عمقی و جانبی مورد بررسی قرار گرفت و نمودارها و نیمرخ های زمین شناسی رسم شد. نتایج نشان دادند که مشخصات فیزیکی و مکانیکی این سایت ها تحت تاثیر تاریخچه زمین شناسی خلیج فارس، فاصله از ساحل ایرانی، عمق آب و همچنین فاصله از دلتای اروند رود می باشند. بطور کلی پارامترهایی مانند اندازه ذرات، حد روانی و مقاومت رسوبات از سایت I به سمت سایتIII روندی افزایشی را نشان می دهند. ضخامت افق رسوبات نرم و سست از سایتI به سایت III کاهش می یابد. با بررسی میزان کربنات مشخص شد که با فاصله از ساحل و به سمت دلتای اروند رود از میزان کربنات کاسته شده است بطوریکه کمترین مقدار آن در سایتIII تعیین شد. همچنین با بررسی نمودار نوع کانیها مشخص شد که بخش اعظم رسوبات در هر سه سایت کانی ایلیت می باشد.}, keywords_fa = {خلیج فارس,زمین شناسی مهندسی دریایی,رسوبات دریایی}, url = {https://www.jiraeg.ir/article_122360.html}, eprint = {https://www.jiraeg.ir/article_122360_9ee3ada9510dae583dbffcc5ee0f3b48.pdf} }